Page 7 of 10
Posted: Sun Jan 29, 2012 8:51 pm
by pablo
Well whatever happens it's one of the most interesting builds going on at the minute, and I'm enjoying following the progress.
I hope it's in A1 condition when you're at croft Ben, cos if we're not away I'll come down. It's only 15 min away.
Posted: Sun Jan 29, 2012 9:25 pm
by Bertie_Mollie
Hi Ben,
That is looking fantastic. You have clearly put a lot of hard work into it.
=D> =D> =D>
Cheers
Andrew
Posted: Mon Jan 30, 2012 6:45 pm
by Luders
Thanks again for the encouraging comments.
Here's a photo of the belly pan finished, though had it been taken outside in the light of day, the light would have reflected off the paint work and it would have looked better.
I cut that side vent in there and in laid some carbon fiber to match the X-09. The left side was left plain.

Posted: Tue Jan 31, 2012 1:21 am
by tescr500
fantastic Luders, to right we build em and we ride them like we stole em, then start over again, happy days.
Posted: Tue Jan 31, 2012 2:37 pm
by si.likes.guiness
good work as usual ben

Posted: Wed Feb 01, 2012 12:52 am
by fred
hi luders ,are they michelin power ones youve got ?
Posted: Wed Feb 01, 2012 8:57 am
by Luders
Yes that's correct. You get a compound choice with the race power one's, so I will be running them all season.
It's all started to come together now and starting to look nice. Here's the tank with the kawasaki sticker.
Complete photos not too far off now.

Posted: Sat Feb 04, 2012 11:28 am
by Luders
Not terribly exciting, but I've added some heat shielding to the belly pan.

Posted: Sun Feb 05, 2012 4:50 pm
by Luders
Here's a couple of pics of the tail piece

Posted: Wed Feb 08, 2012 8:54 pm
by Luders
because the chain was fouling the expansion chamber, I have fitted a motocross chain tensioner via an aluminium bracket and hung it from the swing arm to give it the clearance it required.

Posted: Wed Feb 08, 2012 9:23 pm
by 375
Does the chain run across a block of nylon or is there a roller.
Posted: Wed Feb 08, 2012 9:37 pm
by 500bernie
Looking good Ben
Love the CF =D> =D> =D>
Posted: Wed Feb 08, 2012 9:45 pm
by Luders
It's like a hard rubber and just runs over it
Posted: Thu Feb 09, 2012 8:30 pm
by Luders
I've made some good progress today and finished the painting, mounted the hugger Ade gave me, set the lock stops, bled the rear brake, bent the torsion bar so it clear the tyre and put the exhausts back on.
I am unfortunately away all weekend, so won't be making any progress or taking any photos until Monday now.
I'm looking forward to seeing it all together, as the body work has been in my office for the past 10 days, but also interested to see your reactions and comments to the finished or close to finished article.
Posted: Thu Feb 09, 2012 10:08 pm
by Top-shaggy
I'm sure I speak for many on here when I say this has been one of the most interesting threads for ages - I'm really looking forward to seeing the finished pictures too =D>