gremlin No#
Posted: Mon Apr 22, 2013 7:45 pm
engine wouldn't run below 3000 rpm...after starting by pushing
after swapping cables wouldn't start at all
if engine runs and pull out one cable engine stops (running on both cylinders just before):-&
when spark plug gap decreased on 0.3, working, able to start by kick but below 5000 mumbling. above 5000 running as it should
swapped CDI with other one, same thing
any ideas
after swapping cables wouldn't start at all
if engine runs and pull out one cable engine stops (running on both cylinders just before):-&
when spark plug gap decreased on 0.3, working, able to start by kick but below 5000 mumbling. above 5000 running as it should
swapped CDI with other one, same thing
any ideas