Any ideas,
Posted: Fri Apr 26, 2013 2:27 pm
Some of you my remember i got a pair of original end cans for my 1s i fitted them and took it for its mot (it passed) thats the first small 5 mile plod of a run all winter, every thing ok,that was about 5 weeks ago.
Went for a ride on Wednesday about 20 miles of gentle 30/50 mph riding,
done the last few miles at the top end on and of 70/90 ish mph, i slowed down and stopped at lights and there was a big smell of rubber and smoke, then looked at the right can and smoking alot and i did'nt look at the left can as i was then holding up traffic so pulled over and switched off.
I gave the bike a look over and ok, so started up and rode home the last 3 miles.
When pulling up at the lights the engine sounded fine, and started ok with no smells or smoke on the last few miles home, i let it cool down and checked, coolant level and rad all ok, gearbox oil at correct level and no smell of petrol, plugs are both a nice tan colour not wet,
Started bike Thursday and let it get warmed up,everythings ok, took it up the road and sounds fine with no smell or extra smoke.
I was thinking crank seals but if they go would it not be smoking all the time, but everthing is fine so far?
Is it possible that the end cans could have got up to max temp? and was burning of oil/carbon ? as i did give them a good scrapping and got alot of carbon out of them and this is there first run with these cans.
Went for a ride on Wednesday about 20 miles of gentle 30/50 mph riding,
done the last few miles at the top end on and of 70/90 ish mph, i slowed down and stopped at lights and there was a big smell of rubber and smoke, then looked at the right can and smoking alot and i did'nt look at the left can as i was then holding up traffic so pulled over and switched off.
I gave the bike a look over and ok, so started up and rode home the last 3 miles.
When pulling up at the lights the engine sounded fine, and started ok with no smells or smoke on the last few miles home, i let it cool down and checked, coolant level and rad all ok, gearbox oil at correct level and no smell of petrol, plugs are both a nice tan colour not wet,
Started bike Thursday and let it get warmed up,everythings ok, took it up the road and sounds fine with no smell or extra smoke.
I was thinking crank seals but if they go would it not be smoking all the time, but everthing is fine so far?
Is it possible that the end cans could have got up to max temp? and was burning of oil/carbon ? as i did give them a good scrapping and got alot of carbon out of them and this is there first run with these cans.