Noobie says hello
-
- Heavy Smoker
- Posts: 129
- Joined: Thu Jun 06, 2013 10:32 am
- Location: Australia
Noobie says hello
Hello,
I have a KR1B that's about 90% complete. I've been lurking and learning.
Thought it time to register and say hello
I have a KR1B that's about 90% complete. I've been lurking and learning.
Thought it time to register and say hello
- 500bernie
- Avgas Sniffer
- Posts: 3398
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: Noobie says hello
Welcome to the forum.
Post some photos of your bike,.
Cheers,
Bernie
Post some photos of your bike,.
Cheers,
Bernie
Firecracker Red and Grey C3 300
-
- Heavy Smoker
- Posts: 129
- Joined: Thu Jun 06, 2013 10:32 am
- Location: Australia
Re: Noobie says hello
Its rather ugly at the moment.....500bernie wrote:Welcome to the forum.
Post some photos of your bike,.
Cheers,
Bernie
- 500bernie
- Avgas Sniffer
- Posts: 3398
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: Noobie says hello
Most of them are when we start (some worse than others), we always like to see the transformation from scrap to glory. [-o<
Firecracker Red and Grey C3 300
- Binetta Steve
- Oil Injector
- Posts: 949
- Joined: Sat Nov 10, 2012 6:13 pm
- Location: North Wales
Re: Noobie says hello
Dont worry about the bike its the ugly members on here you need to be aware of. Welcome to a great resource and support forum.
Steve
Steve
kghost wrote:Its rather ugly at the moment.....500bernie wrote:Welcome to the forum.
Post some photos of your bike,.
Cheers,
Bernie
- Top-shaggy
- Premix Junkie
- Posts: 1966
- Joined: Mon Oct 31, 2011 11:09 pm
- Location: Derbyshire
-
- Heavy Smoker
- Posts: 129
- Joined: Thu Jun 06, 2013 10:32 am
- Location: Australia
Re: Noobie says hello
Thanks for the replies and welcomes.
Here is 3196
http://i153.photobucket.com/albums/s203 ... /image.jpg
Here is 3196
http://i153.photobucket.com/albums/s203 ... /image.jpg
-
- Oil Injector
- Posts: 926
- Joined: Sat Mar 22, 2008 5:42 pm
- Location: retford n,nott`s working in cotswolds
- Contact:
-
- Site Admin
- Posts: 1382
- Joined: Tue Jul 25, 2006 11:34 am
- Location: South Wales (Old)
- Contact:
Re: Noobie says hello
Hello and welcome
Cheers
Al
Cheers
Al
"A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools. " - Douglas Adams
-
- Heavy Smoker
- Posts: 129
- Joined: Thu Jun 06, 2013 10:32 am
- Location: Australia
Re: Noobie says hello
It's winter here in Australia if you can call it winter in sunny Queensland on the Gold Coast.
My plan is to replace the parts stripped off over the years and get it running.....will go from there.
My plan is to replace the parts stripped off over the years and get it running.....will go from there.
-
- Premix Junkie
- Posts: 1231
- Joined: Tue Nov 13, 2007 8:52 pm
- Location: Yorkshire
- Contact:
-
- Oil Injector
- Posts: 926
- Joined: Sat Mar 22, 2008 5:42 pm
- Location: retford n,nott`s working in cotswolds
- Contact:
Re: Noobie says hello
id`e worry like ell having a carpeted workshop like that ,where do you do the welding ,cutting ect
- 500bernie
- Avgas Sniffer
- Posts: 3398
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: Noobie says hello
Hi Fred,
I don't think it is a carpet.
But I think that is a tube of solvol near the front wheel
I don't think it is a carpet.
But I think that is a tube of solvol near the front wheel
Firecracker Red and Grey C3 300
-
- Heavy Smoker
- Posts: 129
- Joined: Thu Jun 06, 2013 10:32 am
- Location: Australia
Re: Noobie says hello
LOL yeah its a carpet (or rug if you prefer).
I have burned several holes in it with various hot bits and the TIG welder over the last few months.
The wife gets tired of rugs and rotates them occasionally. I recycle them in the workshop.
Being middle aged and whatnot....makes standing on the concrete that much easier.
I was successful in finding some bits today...KIPS cables, a reg/rect. a radiator etc.
Still missing a CDI and a set of pipes but getting closer to hearing if it will run.
The big question I have: Do I get a KR1S CDI?
I seem to be under the impression that the S CDI opens the KIPS about 500 rpm higher. The S CDI also runs up to a higher RPM yes?
Should I source a KR1 CDI (21119-1234), a KR1S CDI (21119-1287) or spring for aftermarket like the PCDI-10K Zeel?
Thoughts?
I have burned several holes in it with various hot bits and the TIG welder over the last few months.
The wife gets tired of rugs and rotates them occasionally. I recycle them in the workshop.
Being middle aged and whatnot....makes standing on the concrete that much easier.
I was successful in finding some bits today...KIPS cables, a reg/rect. a radiator etc.
Still missing a CDI and a set of pipes but getting closer to hearing if it will run.
The big question I have: Do I get a KR1S CDI?
I seem to be under the impression that the S CDI opens the KIPS about 500 rpm higher. The S CDI also runs up to a higher RPM yes?
Should I source a KR1 CDI (21119-1234), a KR1S CDI (21119-1287) or spring for aftermarket like the PCDI-10K Zeel?
Thoughts?
Re: Noobie says hello
Hello all new to forum just bought 91 kr1s will put up details when it arrives
Happy new year have a safe one
Cheers
Happy new year have a safe one
Cheers