Page 1 of 1
KR1 v KR1S engine
Posted: Sat Jun 29, 2013 12:33 pm
by KR1S
hi
can someone please enlighten me on the differences between a 1 and a 1S as i need a S engine
as i have to purchase one and have no idea on the differences
can you tell by the numbers or any physical differences on the outside?
also carbs - how to identify them and are they shared on any other bikes?
thanks for your help in advance
Re: KR1 v KR1S engine
Posted: Sat Jun 29, 2013 1:56 pm
by Luders
obvious noticeable physical differences are a screw cap gearbox filler on the 1 and the plastic thumb screw off cap on the 1-S.
The clutch inner casing is slightly different with an extra bolt on the 1-S. Harder to spot without taking the motor apart, but the barrels are different too. Numbers inside where the resonator chambers denote 1 from the 1-S.
Re: KR1 v KR1S engine
Posted: Tue Jul 23, 2013 3:57 am
by KR1S
thanks mate
gives me a guide
what about engine numbers
Re: KR1 v KR1S engine
Posted: Tue Jul 23, 2013 6:25 am
by ozzy1
Maybe able to help. Replied to your wanted ad for carbs. Pm me
Re: KR1 v KR1S engine
Posted: Tue Jul 23, 2013 9:36 am
by kghost
Told ya this was a great place mike....
Re: KR1 v KR1S engine
Posted: Tue Jul 23, 2013 1:16 pm
by KR1S
this forum is fricken unbelivable
and in my home town aswell
Re: KR1 v KR1S engine
Posted: Tue Jul 23, 2013 10:49 pm
by 500bernie
Hi Mike, the best bit about the forum is that it is in everyones home town
(And they don't mind posting bits down under)
But you have to reciprocate and post plenty of photos....
Cheers,
Bernie
Re: KR1 v KR1S engine
Posted: Wed Jul 24, 2013 3:11 am
by KR1S
500bernie wrote:Hi Mike, the best bit about the forum is that it is in everyones home town
(And they don't mind posting bits down under)
But you have to reciprocate and post plenty of photos....
Cheers,
Bernie
no worries
can do