At Last......Putting it back together
- 500bernie
- Avgas Sniffer
- Posts: 3397
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: At Last......Putting it back together
Hi Steve
I am not expecting mine to produce as much power as Gary's beast
There are quite a few differences between both the bikes, they are both Stan Stevens 300s but Gary's is a KR1 top end reworked by Mick Abbey, mine is a KR1S.
Gary had Martin go to town on the crankcases, Vforce3 reeds, lightened flywheel, a Zeeltronic and bored out carbs.
Mine has not had any work done to the crankcases, it has standard reeds, lightened flywheel, a Zeeltronic and bored out carbs.
I am not expecting to be able to get out on the bike until July at the earliest (unless I sneak out for a quick blast up the road while the Missus is out).
I will post as soon as I get the parts fitted.
Cheers
Bernie
I am not expecting mine to produce as much power as Gary's beast
There are quite a few differences between both the bikes, they are both Stan Stevens 300s but Gary's is a KR1 top end reworked by Mick Abbey, mine is a KR1S.
Gary had Martin go to town on the crankcases, Vforce3 reeds, lightened flywheel, a Zeeltronic and bored out carbs.
Mine has not had any work done to the crankcases, it has standard reeds, lightened flywheel, a Zeeltronic and bored out carbs.
I am not expecting to be able to get out on the bike until July at the earliest (unless I sneak out for a quick blast up the road while the Missus is out).
I will post as soon as I get the parts fitted.
Cheers
Bernie
Firecracker Red and Grey C3 300
- 500bernie
- Avgas Sniffer
- Posts: 3397
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: At Last......Putting it back together
Firecracker Red and Grey C3 300
- Binetta Steve
- Oil Injector
- Posts: 949
- Joined: Sat Nov 10, 2012 6:13 pm
- Location: North Wales
Re: At Last......Putting it back together
Great to see you are grindin away again. Dont the staff at the Premier inn question your black thumbs and index finger when you check out?
You forgot to say your engine is by far the shinyest by far!
Ill still be inerested in the power outputs , Im scared stiff of taking mine on a dyno ( they do a £10 run with a Dyno Jet at my local bike shop once a year) id be concerned it would nip up.
Steve
You forgot to say your engine is by far the shinyest by far!
Ill still be inerested in the power outputs , Im scared stiff of taking mine on a dyno ( they do a £10 run with a Dyno Jet at my local bike shop once a year) id be concerned it would nip up.
Steve
- 500bernie
- Avgas Sniffer
- Posts: 3397
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: At Last......Putting it back together
Hi Steve,
I am pleased to say that I have never had any comments regarding obvious shortcomings in my personal hygiene regime, I use SLIG (an abrasive waterless hand cleaner, or a blob of lurpak with some salt). I do hope that the missus never sees this
I also have a philosophical and fatalistic view of life and of two stroke motorbikes, we all die sometime and they all go BANG sometime
I tried the Zeeltronic the other day, when I started up the bike for the first time in about 12 weeks, she started and ran really well, both pipes heated up equally and the pickup on the revs was great.
Roll on the good weather.....
Cheers
Bernie
I am pleased to say that I have never had any comments regarding obvious shortcomings in my personal hygiene regime, I use SLIG (an abrasive waterless hand cleaner, or a blob of lurpak with some salt). I do hope that the missus never sees this
I also have a philosophical and fatalistic view of life and of two stroke motorbikes, we all die sometime and they all go BANG sometime
I tried the Zeeltronic the other day, when I started up the bike for the first time in about 12 weeks, she started and ran really well, both pipes heated up equally and the pickup on the revs was great.
Roll on the good weather.....
Cheers
Bernie
Firecracker Red and Grey C3 300
- 500bernie
- Avgas Sniffer
- Posts: 3397
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: At Last......Putting it back together
If only the weather was as reliable as my bike......started her up and it started raining
Roll on summer......
Roll on summer......
Firecracker Red and Grey C3 300
-
- Oil Injector
- Posts: 590
- Joined: Thu Dec 12, 2013 9:58 pm
- Location: York
Re: At Last......Putting it back together
Looks great though Bernie! Fingers crossed for good weather soon, mine needs a run and some cobwebs shaking out.
-
- Oil Injector
- Posts: 800
- Joined: Mon Nov 05, 2007 4:19 pm
- Location: london
Re: At Last......Putting it back together
Wow! Bernie, you need sunglasses in the winter to look at your bike! just thinking of all the tubes of solvol that laid down their lives to get that shine
- Binetta Steve
- Oil Injector
- Posts: 949
- Joined: Sat Nov 10, 2012 6:13 pm
- Location: North Wales
Re: At Last......Putting it back together
The weather forcast said bright spells over Teeside, I know why now. Looking fantastic Bernie
- 500bernie
- Avgas Sniffer
- Posts: 3397
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: At Last......Putting it back together
Hi Guys,
Thanks for the comments.
I thought it was about time that I changed my Avatar to something more appropriate
Cheers
Bernie
Thanks for the comments.
I thought it was about time that I changed my Avatar to something more appropriate
Cheers
Bernie
Firecracker Red and Grey C3 300
-
- Light Smoker
- Posts: 36
- Joined: Sun May 17, 2015 8:12 pm
- Location: Port Talbot
Re: At Last......Putting it back together
Hi Bernie,
That bike looks fantastic, almost too good to ride, well done mate.
Mark Llew
That bike looks fantastic, almost too good to ride, well done mate.
Mark Llew
- 500bernie
- Avgas Sniffer
- Posts: 3397
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: At Last......Putting it back together
Llewe wrote:Hi Bernie,
That bike looks fantastic, almost too good to ride, well done mate.
Mark Llew
Thanks Mark,
At the moment I am either at work or it is raining........so she will be staying in that garage
Cheers
Bernie
Firecracker Red and Grey C3 300
-
- Heavy Smoker
- Posts: 342
- Joined: Fri Mar 07, 2014 3:22 pm
Re: At Last......Putting it back together
ARE YOU GOING TO POLISH THOSE FAIRING BRACKETS500bernie wrote:Llewe wrote:Hi Bernie,
That bike looks fantastic, almost too good to ride, well done mate.
Mark Llew
Thanks Mark,
At the moment I am either at work or it is raining........so she will be staying in that garage
Cheers
Bernie
and put them on ? you cant ride that its too clean .
- 500bernie
- Avgas Sniffer
- Posts: 3397
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: At Last......Putting it back together
Hi Gary,
The brackets are on the polishing list
Cheers,
Bernie
The brackets are on the polishing list
Cheers,
Bernie
Firecracker Red and Grey C3 300
-
- Heavy Smoker
- Posts: 133
- Joined: Sat Feb 14, 2009 4:26 am
- Location: Australia
Re: At Last......Putting it back together
That looks absolutely amazing. Are the grey brake calipers the ones that were polished in the earlier post?
- 500bernie
- Avgas Sniffer
- Posts: 3397
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: At Last......Putting it back together
Hi Ian
No, the polished ones are a spare set that are being prepared for anodising (gunmetal grey), I managed to damage the paint finish one the rear calliper by spilling brake fluid on it, most people wouldn't notice it but I am fussy and I don't want it to happen again, hence the anodising project.
The callipers are nearly ready now, as soon as they are finished I will post some photos.
Cheers
Bernie
No, the polished ones are a spare set that are being prepared for anodising (gunmetal grey), I managed to damage the paint finish one the rear calliper by spilling brake fluid on it, most people wouldn't notice it but I am fussy and I don't want it to happen again, hence the anodising project.
The callipers are nearly ready now, as soon as they are finished I will post some photos.
Cheers
Bernie
Firecracker Red and Grey C3 300