Page 1 of 1
Wheel axle Torque Settings
Posted: Wed Mar 05, 2014 5:25 pm
by headcoats
For KR1S front axle the down load says 80 pounds torque
Is this right
It says rear is 65 pounds so why is the front that much
Re: Wheel axle Torque Settings
Posted: Wed Mar 05, 2014 6:21 pm
by JanBros
forget those numbers, just do it to whatever you thinck is right.
only bolt's I ever torque are for cylinder heads, cam/cranckshafts and conecting rods.
Re: Wheel axle Torque Settings
Posted: Fri Mar 07, 2014 5:38 pm
by headcoats
I have always done the rear around 55 pounds so shall I go the same on the front