Page 1 of 1
alternative front calipers
Posted: Sat Aug 16, 2014 10:52 pm
by Mouser
Hi folks,
Can anyone say what other kawa front calipers (than the original ones) fit 1:1 to the Kr1-s C2 ?
Thanks
Mouser
Re: alternative front calipers
Posted: Sun Aug 17, 2014 8:17 am
by SP_BOTT
There is a thread in the KR-Kive section, that explains all I think??
Re: alternative front calipers
Posted: Sun Aug 17, 2014 12:24 pm
by Mouser
Re: alternative front calipers
Posted: Sun Aug 17, 2014 1:23 pm
by 500bernie
The 6 pots are just a bit heavier, but they look nice
Re: alternative front calipers
Posted: Sun Aug 17, 2014 9:43 pm
by JanBros
the 6-pots have no advantage over 4-pots. none.
they only have the disadvantage that they are crap because the piston's always get stuck and they need complete servicing about every year.
Re: alternative front calipers
Posted: Sun Aug 17, 2014 10:03 pm
by Luders
Best prody brakes, would be off a CBR. Jan is 100% right about the 6 pots, I ran them on my race bike, so know from experience
Re: alternative front calipers
Posted: Fri Aug 29, 2014 9:54 am
by Mouser
Hi guys,
So go my "new" calipers a few days ago.
But they don't really fit
(((.
It are those ones
http://www.ebay.de/itm/05-08-Kawasaki-Z ... 4d199080c0
Here's a picture I took.
The mounting holes are too wide too.
Those should be off a ZZR600 05-08.
I thought these would be a direct fit?!
Or am I wrong...?
Thought I read it in the KR-Vife section...
There are contradictory statments in this section about the calipers.
As Janbros wrote (and the catalogue)
JanBros wrote:if you wonder which calipers from which bike will fit :
http://www.beringer.fr/cat/caten.pdf
it's the Beringer catalogue. how to use it ?
look for a Kwak modell that has the same calipers as a KR1-S like the ZZR600, so in our case it's K11A/K01A. all modells that have the same replacements are a direct fit with no modifications needed.
as for the Blade/GSX-R... calipers : all models with H11A/H01A replacements can be used with the same modifications as mentionned in this topic
These would be a direct fit...
If the zzr600 05-08 don't fit (or I got the wrong ones) can anyone please tell me for sure what calipers of which model are a 100% fit?
Thanks very much
Mouser
Re: alternative front calipers
Posted: Fri Aug 29, 2014 11:39 am
by Luders
Those are the wrong 6 pots, take a look at the photo Bernie posted above.
You need these ones
http://www.ebay.co.uk/itm/Suzuki-GSXR10 ... 2a39956e9f but I still stand by what I said, you would be better off with calipers off a blade.
I believe this style fits with spacers.
http://www.ebay.co.uk/itm/h***a-CBR900- ... 4d1ab25afb
Re: alternative front calipers
Posted: Fri Aug 29, 2014 12:19 pm
by Mouser
Thanks for your answer Luders,
so do the zzr600 05-08 not fit or did the guy send me the wrong ones?
I wanted to mount calipers without any spacers, I wanted a 100% fit, but which ones of Kawa ( 4 pots) do fit?
Thanks
Mouser
Re: alternative front calipers
Posted: Fri Aug 29, 2014 12:46 pm
by Luders
he's sent the right ones, they just don't fit.
I believe these will bolt straight on
http://www.ebay.co.uk/itm/Kawasaki-ZXR4 ... 43ce3a0eff
Re: alternative front calipers
Posted: Fri Aug 29, 2014 2:00 pm
by JanBros
I thinck the confusion comes from the fact that Kawasaki released a ZX6 version as a ZZR600 version.
you correctly found in the Beringer list that ZZR600 -07 would fit, but Beringer talks about the real ZZR, not the ZX/ZZR 600
But you should have listenned to us : 6-pots are crap. they weigh more, do not offer better braking and need servicing way too much.