Titanium gearbox parts
Posted: Wed Apr 25, 2007 7:20 pm
Piccy to follow title says it all 
Things I do to save weight
Things I do to save weight
KR-1S.co.uk Forum
Home of the Kawaski KR250 KR-1 KR-1S & KR-1R
http://www.kr-1s.co.uk/forum/
Titanium gearbox parts
Page 1 of 3
Posted: Wed Apr 25, 2007 7:40 pm
mmmmm... now that's what im talking about, though only ''talking about '' sadly. this sounds like ridiculously special stuff, cant (weight!!) to see piccys.
Posted: Wed Apr 25, 2007 7:55 pm
Might be cheaper to go on a diet 
Posted: Wed Apr 25, 2007 8:22 pm
two wee's n a poo is worth 5mph..... 
Posted: Wed Apr 25, 2007 8:45 pm
2 poo's and a wee is worth 5.5mph!! also proven at mira that bulimic road testers once got 57mph out of an mz 125 once! now that is a grand increase of 50% more speed! even if it meant been built like rik waller, if that meant i could have have the ti g/box then watch out mcdonalds here i come!
even if it meant been built like rik waller, if that meant i could have have the ti g/box then watch out mcdonalds here i come! Posted: Wed Apr 25, 2007 8:46 pm
But not for long
Posted: Wed Apr 25, 2007 8:47 pm
Well, I should safely get the land speed record after a night on the piss and a vindaloo thenmr_bungholeo wrote:two wee's n a poo is worth 5mph.....
Posted: Wed Apr 25, 2007 9:23 pm
Not quite what you expected - but should hopefully let me change gear.
The bushes that go in the selector forks.
Posted: Wed Apr 25, 2007 10:03 pm
I did not know supersport started in 1939, Col what was it like?
Posted: Wed Apr 25, 2007 10:06 pm
lol....
Posted: Wed Apr 25, 2007 10:37 pm
mark, are they been made in limited numbers or just a one off? intrested to know how much they would cost to have made?
Posted: Thu Apr 26, 2007 10:08 am
I asked for 9 and got 8 
I can get some more made - they work out at £3 each once I have rounded up to the nearest £ so say a tenner for a set of 3 including postage in the UK.
Standard items are £2.15 on the Z-power site
The size is slightly different to standard to take out some of the slop. They are due to be tested in two KR's at Mallory so will be able to report next week if they work or not
I can get some more made - they work out at £3 each once I have rounded up to the nearest £
so say a tenner for a set of 3 including postage in the UK.Standard items are £2.15 on the Z-power site
The size is slightly different to standard to take out some of the slop. They are due to be tested in two KR's at Mallory so will be able to report next week if they work
or not Posted: Mon Apr 30, 2007 9:47 pm
Gear box worked a treat
Posted: Mon May 07, 2007 10:58 am
I am going to get 30 made up so ten sets.
Also getting some clutch spring holders made up. These are the 5 pointed thing that holds your clutch springs down. They are die cast and brittle as hell. I have manged to break a couple in the past and I know they are listed as NLA. They were £32.75
Drew up a replacement part this morning just need to get them costed.
New ones will be aircraft spec alloy bit stronger than standard and won't be brittle.
Also getting some clutch spring holders made up. These are the 5 pointed thing that holds your clutch springs down. They are die cast and brittle as hell. I have manged to break a couple in the past and I know they are listed as NLA. They were £32.75
Drew up a replacement part this morning just need to get them costed.
New ones will be aircraft spec alloy bit stronger than standard and won't be brittle.
Posted: Mon May 07, 2007 11:22 am
put me down for a set....n give us a price on the clutch star..cheers..... 