KR-1S.co.uk Forum

Hi guys, I have a KR that I am trying to restore, but finding parts is a little hard. I am in Melbourne Australia and am looking for the following parts:

#RH Side cover that covers the battery.
#cover that fits in fairing to fill hole for radiator cap inspection.
#Engine clutch cover assembly or a cheep guy that can weld repair mine.
#1x front Indicator assembly.
#fuel tank or I will put the epoxy sealer kit through mine.
#Windscreen.
If anyone can assist at good prices I would be very grateful.
Cheers Stew.

Hi Stew,
I might have some if not all of what you need.
Will have a look in the shed tonight.

I'm in Queensland so a fair way away, might be easier to find parts closer?

Skyeport

Stew welcome to the forum, interesting list of bikes. Good luck tracking down the parts, there is a great support network on this forum and I'm sure folk will be along to point you in the right direction.

Steve

You don't need any throttle cables do you Stew? I've still got these:
viewtopic.php?f=2&t=10988
I've had them for a while now and don't need them. If you're interested, I'll consider an offer!

Regards,
James

James P wrote:You don't need any throttle cables do you Stew? I've still got these:
viewtopic.php?f=2&t=10988
I've had them for a while now and don't need them. If you're interested, I'll consider an offer!

Regards,
James

Thanks James for the reply and offer of your cables. I am good with the cables and kick-start.

Thanks Skyeport for having a look in your shed to see if you can help me with my parts request/list. I will be looking forward to seeing what you got.

Cheers all Stew

Hi Stew,

Had a look at what I've got in the shed.

#RH Side cover that covers the battery.- Got one but a bit tatty & needs repairing where the bolt hole is.

#cover that fits in fairing to fill hole for radiator cap inspection. _ Haven't got one
#Engine clutch cover assembly or a cheep guy that can weld repair mine.- Got one, bit of a scrape on the outside but appears to be no internal damage.

#1x front Indicator assembly._ do you mean the fairing mounted ones or the bigger ones some came out with? I have some fairing mounted ones that are fairly faded & tatty.
#fuel tank or I will put the epoxy sealer kit through mine.- Got a spare one but with no cap
#Windscreen. -Haven't got a spare one.

I'll try to add some photos:

More photos:

Steve

Get a price on shipping of those cables (ex kickstart lever) to South Africa and give me a total price
I may just take them off you
As for spares, I can assist in most of that with the exception of the fuel tank\
only issue is i am in RSA