Wich and how many Fork oil
Posted: Wed May 30, 2007 11:05 am
Hi again,wich fork oil do you use and how many ccm must i fill in one fork??
you can download it at the top of the page....
KR-1S.co.uk Forum
Home of the Kawaski KR250 KR-1 KR-1S & KR-1R
http://www.kr-1s.co.uk/forum/
Wich and how many Fork oil
Page 1 of 1
Posted: Wed May 30, 2007 7:09 pm
its all in the manual...
you can download it at the top of the page....
you can download it at the top of the page....
Posted: Wed May 30, 2007 7:10 pm
or click this...
http://www.kr-1s.co.uk/manual/Part%2012 ... ension.pdf
http://www.kr-1s.co.uk/manual/Part%2012 ... ension.pdf
Posted: Wed May 30, 2007 10:08 pm
What is 10w20 wt oil . Fork oil here is just a straight wt . Think its better to use 20wt and add a bit more than recomended .
Posted: Thu May 31, 2007 7:50 am
use 10w...20 will b too thick....
Posted: Fri Jun 01, 2007 2:57 am
Am using 10wt now at recommended height and get way too much dive under brakes ,like bottoming , track use mind . Think some heavier springs will help too .
Posted: Wed Jun 06, 2007 2:47 am
thx
Posted: Wed Jun 06, 2007 9:13 pm
Mark (MJ43) recommended this to me when I made the same query a while ago-
10w and set the level at about 160mm from the top forks compressed and no spring fitted.
Works a treat for me, but I ride on the road only and weigh naff all, you might want to stiffen it a bit if you do any track work or are not built like a jockey.
Mike
10w and set the level at about 160mm from the top forks compressed and no spring fitted.
Works a treat for me, but I ride on the road only and weigh naff all, you might want to stiffen it a bit if you do any track work or are not built like a jockey.
Mike