crank bearrings and seals

JanBros · Post by **JanBros** » Fri Jun 08, 2007 8:38 pm

anybody knows where I can just buy the seals and bearrings for a crank ?

I just can't find them over here, and sending my crank to Stan or somebody else in the UK and then shipping it back is just way too expensive

.

mgtkr1 · Post by **mgtkr1** » Fri Jun 08, 2007 9:00 pm

im sure one of the tuners would send you bits, though at a premium. SEP of kegworth are specialists in recon/rebuilding cranks so are likely to have the bits you require and would probably sell them and post em, got to be cheaper then shipping a crank overseas. will see if i still have the phone number for SEP. is it just seals and bearings you require? or are you after rods etc? im sure rods are NLA so people fit kdx rods (i think) as there identical.

rc46 · Post by **rc46** » Fri Jun 08, 2007 9:34 pm

Always try BDK! they recently rebuilt mine with seals, bearings and new rods......

Garry · Post by **Garry** » Sat Jun 09, 2007 10:55 pm

SEP have a good reputation - but they aren't cheap

JanBros · Post by **JanBros** » Sun Jun 10, 2007 9:52 am

and does anybody has mail-adresses, web-pages from these guys ??

mr_bungholeo · Post by **mr_bungholeo** » Sun Jun 10, 2007 10:08 am

www.sep-kegworth.co.uk
www.bdkraceeng.co.uk

JanBros · Post by **JanBros** » Sun Jul 08, 2007 10:59 pm

mr_bungholeo wrote:www.sep-kegworth.co.uk
www.bdkraceeng.co.uk

first one hasned answered, second one says he forwarded it to "Sam, he should be able to send you a price for all the bearings , seals, rods that you require" but I think Sam has died

anybody else an idea ?

Post by **alimorg** » Mon Jul 09, 2007 9:51 am

JanBros wrote: but I think Sam has died

He must have died after the 23rd of june then, because that was the last time he posted on here

Cheers
AL

rc46 · Post by **rc46** » Mon Jul 09, 2007 3:41 pm

Did you email sam@bdkraceeng.co.uk ?

Sam has emailed me today so he is around, he normally responds within 12hrs as he checks his mail when he gets to work.

Did you mention your from the KR site>?

Might help...

Defo has the bits as i have a new crank sitting in a set of cases ready for next year built by Sam a few months ago!!

JanBros · Post by **JanBros** » Mon Jul 09, 2007 10:46 pm

rc46 wrote:Did you email sam@bdkraceeng.co.uk ?

Sam has emailed me today so he is around, he normally responds within 12hrs as he checks his mail when he gets to work.

Did you mention your from the KR site>?

Might help...

Defo has the bits as i have a new crank sitting in a set of cases ready for next year built by Sam a few months ago!!

this is what I sended, and his reply :

Jan,
I have forwarded this to Sam, he should be able to send you a price for all the bearings , seals, rods that you require.

Regards,
James
----- Original Message -----
From: Jannemie
To: james@bdkraceeng.co.uk
Sent: Monday, June 11, 2007 10:37 PM
Subject: seals and bearrings KR1 cranck

Hi,

I'm from Belgium, and over here nobody can find replacemant seals and bearrings for a KR1-cranck. Someone on the KR1-forum in the UK said I should contact you.

If shipping a cranck twice overseas wasn't that expensive, I wouldn't mind sending my cranck over, so I'm looking for someone who can just sell me the seals and bearrings.

Can you/would you sell them to me, and how much would it be for a full set for one cranck ?
Do you have complete rods with big ends asswell ? (I know where I can buy those, but getting everything from one adresse again saves me a bit on the shipping).

Cheers, Jan

I'll try sending it to Sam directly

rc46 · Post by **rc46** » Mon Jul 09, 2007 10:57 pm

Yeah go Direct, LOL James is awsome at the egineering side, but IT techy email things and it might not get there LOL, Sam's the man who will sort you out, email direct!

If you do it tonight he'll reply tuesday sometime!

JanBros · Post by **JanBros** » Mon Jul 16, 2007 3:46 pm

I was right, Sam IS dead

RC46, could you ask him

rc46 · Post by **rc46** » Mon Jul 16, 2007 11:23 pm

Doh!

Yeah ill give him a call in the morning for you, Strange????

He's normally good at this stuff!, Was there the other day and they have had a load of KR work come in from Diffrent People, I saw a Crank on the table i thought it was yours!!!!

Yeah watch this space!!!,

rc46 · Post by **rc46** » Mon Jul 16, 2007 11:32 pm

I can give you an estimate right now!

from my recipt,

so you have an idea. there will be postage as well i guess, as this is just parts,

All aprox as they may have diffrent suppiler etc but all within a few quid. and there is VAT to Add, not sure how that will work if its sent to belguim.

4 x Main Bearings approx £55.00
4 x crank seals approx £45.00
2 x con rod Kits approx £72.00

My Bill Including Labour and VAT was £270 ish that was for a Full rebuild and to true the crank up as well!

rc46 · Post by **rc46** » Tue Jul 17, 2007 4:57 pm

JanBros,

Spoke to Sam, he replied on the 10th July 07 10:53am, do you have a spam blocker in place is it possiable it got blocked.

Anyway, hes gona send again, and cc me in incase so i can forward it on.

He did say give him a call, he always answer's (as long as he's not in the dyno room) other wise look out for your mail.

The Email sever they use is down at the momment so it probally wont be untill tomorow but as i say give him a ring he'll be happy to help....

+44 (0)1508 481713

Cheers