Are the rear brakes the same on the 2 models ,carrier,caliper etc?
Also i have a pro-bolt catalogue for some disc bolts (front KR1S)
but i'm not sure of which to order as i have none to compare.
They are M8 but what length and what is the size of the collar in mm.
AND....what size are the bleed nipples
Are the KR1/KR1S rear brakes the same ?? Disc bolts & ni
-
- Avgas Sniffer
- Posts: 2120
- Joined: Sat Jun 09, 2007 10:10 am
- Location: Pig on the wall country
Are the KR1/KR1S rear brakes the same ?? Disc bolts & ni
Last edited by headcoats on Thu Jun 21, 2007 5:00 pm, edited 1 time in total.
Can it yer old boiler
-
- Premix Junkie
- Posts: 1484
- Joined: Tue Jul 25, 2006 6:45 pm
- Location: 36 miles from mecca
- the-elf
- Avgas Sniffer
- Posts: 2800
- Joined: Wed Jul 26, 2006 2:48 pm
- Location: Rockingham, Western Australia
calipers and disks are different on both models so are fork bottoms
-- Lets go Racing
Sponsored by:
Paddockstand Ltd: Tyre and Bike spares http://www.paddockstand.co.uk
Sponsored by:
Paddockstand Ltd: Tyre and Bike spares http://www.paddockstand.co.uk
- JanBros
- Avgas Sniffer
- Posts: 3306
- Joined: Wed Jul 26, 2006 11:50 pm
- Location: the land of Francorchamps
-
- Premix Junkie
- Posts: 1484
- Joined: Tue Jul 25, 2006 6:45 pm
- Location: 36 miles from mecca
To my knowledge calipers and discs are the same 1 and 1s.
Disc bolts are as you said m8. From underside of head length is 30mm, threaded length 25mm, shouldered section 5mm by 10mm dia. Head dia 18mm.
Can't remember what size the hel bleed nipples are, but if you order them direct from hel it gives you the option for Kwak and model etc.
Disc bolts are as you said m8. From underside of head length is 30mm, threaded length 25mm, shouldered section 5mm by 10mm dia. Head dia 18mm.
Can't remember what size the hel bleed nipples are, but if you order them direct from hel it gives you the option for Kwak and model etc.
- KR1 Man
- Oil Injector
- Posts: 506
- Joined: Mon Jan 29, 2007 8:57 pm
- Location: UK
KR1 Man calling to say yes the rears are the same on both as I swapped both over on Sleeping Beauty for a better set from the KR1-S I am still breaking for spares. Just watch the thread on the bleed nipple. All the best, KR1 Man.
RD350 LC YPVS. Also grandson Declan's KR1 with ZXR black/purple paintjob/ KR1-s upgrades and max polishing
- the-elf
- Avgas Sniffer
- Posts: 2800
- Joined: Wed Jul 26, 2006 2:48 pm
- Location: Rockingham, Western Australia
Opps . Yep they are the same on both.JanBros wrote:he asks about the rear ones .the-elf wrote:calipers and disks are different on both models so are fork bottoms
-- Lets go Racing
Sponsored by:
Paddockstand Ltd: Tyre and Bike spares http://www.paddockstand.co.uk
Sponsored by:
Paddockstand Ltd: Tyre and Bike spares http://www.paddockstand.co.uk