The standard RGV vj22 USD forks don't have adjustable damping, but it seems that adding adjustable rebound damping can be achieved by replacing the fork caps with fork caps from, say, a GSX-R750. This woud be a fairly straightforward mod; has anybody done that?
Adding adjustable compression damping would be a very different matter as at the very least it would require machining of the lower forks to accept the required fittings.
RGV USD forks modification
-
- Heavy Smoker
- Posts: 474
- Joined: Fri Jun 26, 2009 12:09 am
- Location: Kingdom of the Netherlands
RGV USD forks modification
"Mine is a long and sad tale", said the mouse.
"Indeed it is", said Alice, looking at the mouse's tail.
"Indeed it is", said Alice, looking at the mouse's tail.
- JanBros
- Avgas Sniffer
- Posts: 3306
- Joined: Wed Jul 26, 2006 11:50 pm
- Location: the land of Francorchamps
Re: RGV USD forks modification
I'd look out for more recent forks to put in, it's a much better then trying to upgrade old stuff.
ZX6R '04 forks were a massive improvement over the original ZXR400's in my ZXR4/600
ZX6R '04 forks were a massive improvement over the original ZXR400's in my ZXR4/600
My ultimate goal is to die young as late as possible !
-
- Heavy Smoker
- Posts: 474
- Joined: Fri Jun 26, 2009 12:09 am
- Location: Kingdom of the Netherlands
Re: RGV USD forks modification
Thanks for the tip, Jan, but I would rather modify the RGV forks if possible. First, I already have them. Second, I don't want to use four-stroke parts if I can avoid it- I already have ZXR400L fork yokes lined up and that's bad enough! Their saving grace is that at least they are Kawasaki bits.
"Mine is a long and sad tale", said the mouse.
"Indeed it is", said Alice, looking at the mouse's tail.
"Indeed it is", said Alice, looking at the mouse's tail.