Speedo drive fitting>?

MatthiasD · Post by **MatthiasD** » Sun Nov 18, 2007 3:37 pm

Right, I was chuffed when my bits arrived, tried to fit them today and wondered why they didn't fit? After looking at the parts list on this website it appears that I'm missing a bit that goes in between the speedo drive and the wheel? (the bits in the red circle, numbered 1 & 2)
Unfortunately the parts list doesn't show the part numbers. Does anyone have a list which does show these numbers so I can try and order them?
See pic:

I presume the bit in the blue circle is the threaded bush that goes inside the left hand fork leg?

JanBros · Post by **JanBros** » Sun Nov 18, 2007 9:31 pm

at the homepage off this forum, on top, there is a link with the parts and numbers

MatthiasD · Post by **MatthiasD** » Mon Nov 19, 2007 7:34 pm

You mean this page?
http://www.kr-1s.co.uk/manual/parts.php

That doesn't show the speedo drive

Red Devil 777 · Post by **Red Devil 777** » Mon Nov 19, 2007 7:47 pm

Try here
http://www.teamsparrow.co.uk/
Parts list is on left hand side of page and it's still working

vector74 · Post by **vector74** » Mon Nov 19, 2007 7:50 pm

MatthiasD · Post by **MatthiasD** » Wed Nov 21, 2007 8:36 pm

Many thanks! =D>

kwackman12 · Post by **kwackman12** » Thu Nov 22, 2007 8:04 pm

ZXR 400 USES THE SAME PART