Page 1 of 1
NO SPARK @#*!??????
Posted: Tue Jun 10, 2008 12:33 am
by gussguss
have read a few previous posts and am having a similar problem
took great running {TACHO WAS NOT WORKING}kr1s for blue slip {bought 2 as package} try to start to go home and no spark, no warnings, no miss fires??? Have swapped cdis but have no idea if second cdi is any good to be honest?
Any ideas to stop the madness??
WANNA BUY A BIKE? OR 2 [-o<
Posted: Tue Jun 10, 2008 7:48 am
by Garry
normally its the stator coil that fails
check the readings as per the on-line manual
you can get them rewound to repair them if you have trouble getting
a replacement
Posted: Tue Jun 10, 2008 11:49 pm
by gussguss
cheers ill get on to it and see what happens
[-o<
Posted: Wed Jun 11, 2008 8:44 am
by ScottaKR
Came across a similar problem when I brought the remains of a KR1S a while back.
He'd taken it for a run before selling it and noticed the tacho not working, but still ran fine. The next time he tried to start it, he had no spark.
Turned out that the regulator had failed, which meant that it was being seriously overcharged. The first casualty of it running at such high voltage was the tacho, followed shortly by the CDI unit.
I'd recommend you test your regulator before you try running it again, or if you do run it, check the charge rate isn't too high.
Good luck, Scott.
Posted: Wed Jun 11, 2008 8:58 am
by rgvlee
offtopic...
Sounds like the pair that was recently on ebay?
hi
Posted: Mon Sep 29, 2008 9:25 pm
by qwaka
i just got my kr1s on the road went to silverstone on way home started to run on only 1 cylinder right hand side stopped? bike stopped completly restarted ran on 2 cylinders then died NO SPARK CAN ANYONE HELP ME PLEASE?
