Page 1 of 1
Carb Cleaning ?
Posted: Thu Sep 04, 2008 9:10 am
by headcoats
I have some PWK 28 carbs and don't know anything about them as in what life they have had.
So i want to clean them properly,get all the holes clear etc.
What is the best method for this
Posted: Thu Sep 04, 2008 9:34 am
by garye345
i found a can a carb cleaner a set a torque keys(size 25 i think)small flat screwdriver,and a 6or8mm spanner.after that its pretty straight forward
Posted: Thu Sep 04, 2008 9:38 am
by Red Devil 777
ultrasonic inside, vapourblast outside, costs though.
Posted: Thu Sep 04, 2008 3:22 pm
by martin
oh no.not carb trouble, still having nightmares about mine
like gary345 says, good old soak in carb cleaner
Posted: Thu Sep 04, 2008 4:13 pm
by 666damned
an air compressor can help as well.................
Posted: Sat Sep 06, 2008 7:24 pm
by nate
for garunteed clean carbs, use the following...
1) strip the carb completely and throw everything in a clean tub with coca cola in in (diet or ordinary, doesnt seem to matter)
2) leave to soak for 2 to 3 hours
3) remove and wash very thoroughly in warm water with lots of fairy liquid
4) remove, leave to dry for 30 mins...
5) wash over with a new paint brush and some cellulose thinners (or equiv)
6) blast off with compressed air and re assemble as you go...
Have done my carbs countless times, plus the lawnmowers etc.... works a treat everytime
coke
Posted: Sat Sep 06, 2008 10:12 pm
by fastfreddie
all coke heads take note
