KR-1S.co.uk Forum

for those of you who have fitted an RGV wheel, have you also fitted the rear disc too?
If so, please could you tell me the diamter of the disc and also the PCD of the mounting holes.

I have aquired what I think is an RGV wheel, however, in order to fit my current caliper setup, I need a disc that has a 220mm diameter, 4 mounting holes on a PCD of 100mm.

the disc should be the same diameter as the kr1/s as the rgv and kr use the same rear caliper. the rgv disc also uses a 4 bolt arrangment while the kr uses 3?