Page 1 of 1
SUPER TUNED MOTOR
Posted: Mon Sep 22, 2008 5:05 pm
by wakasaki
Ok ...Here is the Finished article..
Fully Tuned Motor
35mm Carbs Air Striker
uprated Jets and Needles
V Force Reeds
New Inlets
Fully Tuned Graham File Engine
polished inlets etc..
shortend inlet assem
new crank rods bearings
Lightend Rotor
New Electrics
New seal bearings
New Clutch Everything
Alt Gearing
new water pump assemble seals
Wossner Forged Pistons
I have disconnected the oil pump
its just there for a blank
new valve assembly all done
it will have a modified airbox
Total Monies ....
and before some say Madness...
it will be worth it..
£2.5k...Yawoooossaa..
new Power valves polished etc..
Posted: Mon Sep 22, 2008 5:09 pm
by D.I.Y
thats a monster what bhp u reconing
Posted: Mon Sep 22, 2008 5:10 pm
by the-elf
Bugger me thats so clean that I need sun glassess on just to look at it =D> =D> =D> =D> =D> =D> =D> =D> =D>
Posted: Mon Sep 22, 2008 5:12 pm
by mgtkr1
looks nice. should be reliable after graham worked his magic. did he do the flywheel? saw one recently on ebay but got beat.
c
Posted: Mon Sep 22, 2008 5:16 pm
by wakasaki
As the lads in the know..
Mgbgt..kr1
Elf etc..and Mj..
Proberly 65ish..Hp
Sauce that is...
Yes the rotor is his...
its about 180gramslighter
than std..and the pistons
are 30grams etc
so ..fingers crossed
the head has beeen
totally reworked..and the squishes
so i hope it will not detonate..
pics when finished..
Posted: Mon Sep 22, 2008 5:31 pm
by SHimmer45
looks great.. sure it be reliable as well
for a tuned motor
Re: SUPER TUNED MOTOR
Posted: Mon Sep 22, 2008 10:20 pm
by Bertie_Mollie
OMG, I hate to tell you this. Someone spilt paint on yer pistons
wakasaki wrote:
Posted: Tue Sep 23, 2008 6:38 am
by col
when it looks that good i dont think you'll find
anyone questioning the cost. Quality isnt cheap.
h
Posted: Tue Sep 23, 2008 9:19 am
by wakasaki
Thankyou.. Everyone..
Bertie bassett...
Its not paint...its a teflon coating
there Forged Pistons Not casted...
it's to aid the heat transfer when warming up..
as they work to finer tolerances...
paint..... OOOOOhhh i Hate Cheap laughs..
"Good Job Its green Paint then...eh eh hurrrr dorrr"
Posted: Tue Sep 23, 2008 9:27 am
by alimorg
What is the sparkly metallic finish on the clutch cover? looks nice
Cheers
AL
Posted: Tue Sep 23, 2008 9:46 am
by col
looks like shotblasted alloy to me
c
Posted: Tue Sep 23, 2008 10:14 am
by wakasaki
Shotbalsted ali....
Poor Ali....
Nop... its painted...
Met Aluminium..
Same as the frame...
Nice and Shiny.....
G
Posted: Tue Sep 23, 2008 10:23 am
by ScottaKR
If I'm not mistaken, it's the same paint he used on the K-RR frame.
Going by the detailing done on the motor so far (and your previous projects) it's going to be another work of art.
Can't wait to see the results.
Posted: Tue Sep 23, 2008 9:37 pm
by kwackman12
Looks a cracking job Waki, so when are we going to see it on the track ?
Posted: Wed Sep 24, 2008 9:59 pm
by andyb
nice one gary looking good mate
=D>
Andy.