KR-1S.co.uk Forum

got my new stator from electrixworld today thing is, you have to fit the wires in to the connector block yourself, [stator comes with connector blocks and 6 crimps in a seperate bag] anyone fitted one before, as cant see a problem working out the red,white and black wire. , but there are 3 yellow wires all coming out together,so am i right in guessing all the yellow wires are the same and its just a case of matching any of them up to any of the yellow wires on the block of the loom

martin wrote:got my new stator from electrixworld today thing is, you have to fit the wires in to the connector block yourself, [stator comes with connector blocks and 6 crimps in a seperate bag] anyone fitted one before, as cant see a problem working out the red,white and black wire. , but there are 3 yellow wires all coming out together,so am i right in guessing all the yellow wires are the same and its just a case of matching any of them up to any of the yellow wires on the block of the loom

Yep I've fitted one yo mine. The three yellow wires are all the same and can connect to any of the three in the loom.

knew you would know the answer elf soon as the flywheel holder and puller arrive,i can get busy spoke to them on the phone about a pick up coil, they cant match one up for the kr, shame really as there nla from kwak,

Think the pickup from a kmx is the same but might have a extra wire?
Lee (frog32) has one i'm sure he will have a look for you

I've tested pick-up coils from a GPZ600 and a GTR1000 and they work as good as originals