here is my project

Luders · Post by **Luders** » Fri Jan 13, 2012 11:55 am

nice work Wayne, you should be proud

tescr500 · Post by **tescr500** » Fri Jan 13, 2012 12:17 pm

Cheers Luder i'm looking forward to the finish line now, but still a bit to do, i see your fairing looks pretty dam good, aero dynamics cheers.

Tambo · Post by **Tambo** » Fri Jan 13, 2012 12:48 pm

=D> =D> =D>

That's a cracking transformation Wayne

Post by **500bernie** » Fri Jan 13, 2012 2:05 pm

Hi Wayne,

Fantastic job you should be very proud of that =D> =D> =D>

Is that a KR1S engine that you have?
(Not sure if I could see a fixing for the inner clutch case behind the oil filler)

Cheers,
Bernie

Charles · Post by **Charles** » Fri Jan 13, 2012 4:53 pm

top job !! =D> =D>

Charles

headcoats · Post by **headcoats** » Fri Jan 13, 2012 6:32 pm

WOW what a transformation

Those before and after piccies are really something

375 · Post by **375** » Fri Jan 13, 2012 6:48 pm

Its lost its patina now

Fantastic job you took on a wreck there. When is the fairing going on

(looks like Daniel has had a hair cut)

SP_BOTT · Post by **SP_BOTT** » Fri Jan 13, 2012 7:22 pm

Excellent work there, can't believe what it looked like before, don't think I'd have dared take that on

One 'suggestion' would be to move the earth from the reg position to the coil fixing, as it's possibly insulated by the rubber well nut, unles you've got a good earth through the bracket??

Once again, would be happy myself if I had that in the garage.

jarno · Post by **jarno** » Fri Jan 13, 2012 7:54 pm

What a great tranformation.
great job =D> =D>

malsa · Post by **malsa** » Fri Jan 13, 2012 10:19 pm

nice job =D> like the chrome powder coat

tescr500 · Post by **tescr500** » Sat Jan 14, 2012 12:25 pm

cheers everybody just makes all the hard work worth while.
Hi Bernie i'm interested to know if it is a kr1s engine, i know the top end is can you explain please for me.
Cheers Charles.
Hi Headcoats it does look great i thought to the b4 and after shots cheers.
Cheers 375 patina has many meanings but all points in the general direction i catch your drift, and the fairing needs a bit of tlc as i broke it but not a problem though, and i have had my hair styled to the over 40 look

Hi SP i have been looking at that and i don't think there is a good earth there, i did try to scrape some paint but don't think it works as i connected the earth from my hot wire connecter the red ignition on in photo's, i connected the earth to get the idiot lights neutral,oil ones on but did not work but worked else where but still run ok apart from rev counter not sure if that earth has anything to do with it cheers.
Cheers Jarno.
Cheers Malsa

Post by **500bernie** » Sat Jan 14, 2012 2:41 pm

Hi Wayne,

The KR1S has an extra fixing behind the filler cap.

Cheers,
Bernie

tescr500 · Post by **tescr500** » Sat Jan 14, 2012 4:18 pm

Hi Bernie yes it does have one and so did the original engine, or i should say the one that was in it when i got it cheers.

tescr500 · Post by **tescr500** » Sat Jan 14, 2012 4:20 pm

and i must say that polishing is bloody great bernie.

Post by **500bernie** » Sat Jan 14, 2012 5:33 pm

Thanks Wayne,

Still at it

I would rather be able to spray paint

Cheers
Bernie