Clutch re-assembly
Posted: Tue Dec 05, 2006 1:48 pm
Can't really make this out from my manual, but might not make any difference 
The thin spring disk that goes on after all the disks onto the splined hub - is it narrow end to the disks, or narrow end to the hub ?
The photo looks as if it is 'concave' end towards the disks - which would be narrow end to the hub
Any ideas ?
The thin spring disk that goes on after all the disks onto the splined hub - is it narrow end to the disks, or narrow end to the hub ?
The photo looks as if it is 'concave' end towards the disks - which would be narrow end to the hub
Any ideas ?