Page 1 of 1
Busted bulbs
Posted: Fri Mar 12, 2010 8:11 pm
by pablo
Does anyone know how I can stop my Husqvarna WR250 enduro busting stop and tail light bulbs
It's not blowing them,it's not the regulator,It must be vibration.Can't seem to finish a ride with an intact bulb
Posted: Fri Mar 12, 2010 8:49 pm
by THE FLUTE
My ktm does the same there is an american company that make LED ones for the ktm I will see if I can find it and let you know. Is yours AC or DC voltage??
Posted: Fri Mar 12, 2010 8:55 pm
by mr_bungholeo
renew the rubbers on the bolts if it a few years old or fit h**da bulbs,they have a bridge between the filament to stop it vibrating to bits...
Posted: Fri Mar 12, 2010 10:29 pm
by twostrokesmoker
Err push it everywere
Posted: Sat Mar 13, 2010 4:03 pm
by Bert
These guys will probably have a replacement LED to fit
http://www.customdynamics.com/
Bert
Posted: Sat Mar 13, 2010 7:16 pm
by pablo
THE FLUTE wrote: Is yours AC or DC voltage??
It's DC.I reckon LED looks like the way to go.The're expensive but at the rate I'm getting through bulbs it'll be worth it.