Marmite #2
-
- Avgas Sniffer
- Posts: 2120
- Joined: Sat Jun 09, 2007 10:10 am
- Location: Pig on the wall country
Here is the KR1S wheel and disc with the RGV 250 lower fork and caliper fitted
Even the KR1S spindle screwed into the left stanchion.
This is far from sussed but could be promising.
No idea of the spacing yet as i need some yokes and the slot for the speedo drive is totaly wrong on the RGV forks
The Kr1S disc sticks out of the RGv pads by about 3mm but it doesn't hit the caliper,the pads on the inner edge are perfectly in line and the inside of the caliper doesn't touch the spokes either.
It is close though but so are the standard KR calipers
Last edited by headcoats on Thu Jun 19, 2014 7:56 am, edited 1 time in total.
Can it yer old boiler
-
- Avgas Sniffer
- Posts: 2120
- Joined: Sat Jun 09, 2007 10:10 am
- Location: Pig on the wall country
Uploaded with ImageShack.us
This strange picture shows the inside of the petrol tank after the POR15 tank sealer has been put in
Can it yer old boiler
-
- Avgas Sniffer
- Posts: 2120
- Joined: Sat Jun 09, 2007 10:10 am
- Location: Pig on the wall country
It wasn't that bad Charles but i did have big rust flakes come out the tank when i drained itCharles wrote:Could you please show us a pic how it looked before?headcoats wrote:This strange picture shows the inside of the petrol tank after the POR15 tank sealer has been put in
thanks,
Charles
More a precaution than anything but i would say the sealer will cover quite heavily rusted tanks
Can it yer old boiler
- SHimmer45
- Premix Junkie
- Posts: 1400
- Joined: Tue Jul 25, 2006 7:51 pm
- Location: SOuthampton Hants UK
- Contact:
-
- Avgas Sniffer
- Posts: 2120
- Joined: Sat Jun 09, 2007 10:10 am
- Location: Pig on the wall country
- pablo
- Premix Junkie
- Posts: 1546
- Joined: Fri Nov 14, 2008 9:37 pm
- Location: Co Durham
-
- Avgas Sniffer
- Posts: 2120
- Joined: Sat Jun 09, 2007 10:10 am
- Location: Pig on the wall country
The Missus said they look like they are made out of scrappablo wrote:It is good,that three stage kit has rescued two really manky tanks for meheadcoats wrote:
This strange picture shows the inside of the petrol tank after the POR15 tank sealer has been put in
You gonna leave those exhausts there and look at them for a few days
She can't believe i am going to leave them like this
I guess she has seen the polished ones on the other bike
This tank sealer is also resistant to ethanol which some other sealers ain't
Can it yer old boiler
- 666damned
- Oil Injector
- Posts: 674
- Joined: Sat May 05, 2007 7:40 pm
- Location: Hull
- 666damned
- Oil Injector
- Posts: 674
- Joined: Sat May 05, 2007 7:40 pm
- Location: Hull
oops forgot......haven't been for a while and didnt read all the thread........headcoats wrote:Lomas Brother and they are going on me butt naked LC (aka marmite #2)
'So,who's paranoid'.........The Damned's new album,released 10/11/2008 or available to d/load from...'officialdamned.com .....go on treat yourself........
-
- Avgas Sniffer
- Posts: 2120
- Joined: Sat Jun 09, 2007 10:10 am
- Location: Pig on the wall country
i may be the last person to know this but bead blasting rips off anodising
This Aprilia rear caliper had manky gold anodising and a quick blast and a buff up with a brass wired brush and you get this.
Last edited by headcoats on Thu Jun 19, 2014 7:57 am, edited 1 time in total.
Can it yer old boiler