Dans KR1S
-
- Light Smoker
- Posts: 28
- Joined: Fri Oct 08, 2010 2:25 pm
- Location: Nottingham
- Contact:
Dans KR1S
Alright Chaps
I`m not going to put any finished pics up as i need your help to finish it!
Ive took a good few pictures of parts that need reconditioning ive ordered new fasteners where possible but things like engine mounting bars etc that are tatty im not sure how i get them back to the original finish.
Also the fork bottoms are crashed damaged so without painting them they`ll never be original please be picky as this is my first restoration and a lot of you guys are better at it than me
Could only get a fibreglass fairing
Still after Nice original bars and clamps
My friend has an aqua blaster so i`m able to clean Alloy up lovely but i`m not sure what the original finish would be on the rear sets etc can anyone please shed some light on this?
I`m going to repaint all the calipers anybody know a good colour match? Also the rear caliper mounting bracket is tatty are these painted originally or should i powder coat it?!!
Im going to borrow another swingarm and get it powder coated the same as the frame as this polished one looks wack. Ill put new bolts in the chain adjusters and i`ve ordered a new Wheel nut and washer but cant get a spindle...
Spannies are currently matt black but i`m going to but some heat proog lacquer to shine them similar to the originals.
What i`d do for a new spindle!
All advice welcome fellas i want to do a proper job on this.
Dan
I`m not going to put any finished pics up as i need your help to finish it!
Ive took a good few pictures of parts that need reconditioning ive ordered new fasteners where possible but things like engine mounting bars etc that are tatty im not sure how i get them back to the original finish.
Also the fork bottoms are crashed damaged so without painting them they`ll never be original please be picky as this is my first restoration and a lot of you guys are better at it than me
Could only get a fibreglass fairing
Still after Nice original bars and clamps
My friend has an aqua blaster so i`m able to clean Alloy up lovely but i`m not sure what the original finish would be on the rear sets etc can anyone please shed some light on this?
I`m going to repaint all the calipers anybody know a good colour match? Also the rear caliper mounting bracket is tatty are these painted originally or should i powder coat it?!!
Im going to borrow another swingarm and get it powder coated the same as the frame as this polished one looks wack. Ill put new bolts in the chain adjusters and i`ve ordered a new Wheel nut and washer but cant get a spindle...
Spannies are currently matt black but i`m going to but some heat proog lacquer to shine them similar to the originals.
What i`d do for a new spindle!
All advice welcome fellas i want to do a proper job on this.
Dan
- pablo
- Premix Junkie
- Posts: 1546
- Joined: Fri Nov 14, 2008 9:37 pm
- Location: Co Durham
Dan the bike looks to be in non too shabby nick.The fasteners look ok but if you wanted you could get them re electroplated along with the engine mounting bolts,spindles etc.I got all the fasteners brackets done for £35.
The handlebars and fork bottoms seem to be your biggest problems,but I'm sure you'll be able to get them.
I used PJ1 satin on the caliper mounting bracket and sprocket carrier.There's a ford colour I think it's oyster gold thats a good colour match for the calipers,but with the stuff I used a whiff of brake fluid and it's off.Let me know if you find owt better.I'm not 100% happy with mine.
Looks like a nice enough bike Dan,good luck.
The handlebars and fork bottoms seem to be your biggest problems,but I'm sure you'll be able to get them.
I used PJ1 satin on the caliper mounting bracket and sprocket carrier.There's a ford colour I think it's oyster gold thats a good colour match for the calipers,but with the stuff I used a whiff of brake fluid and it's off.Let me know if you find owt better.I'm not 100% happy with mine.
Looks like a nice enough bike Dan,good luck.
"Turned out nice again"
-
- Light Smoker
- Posts: 28
- Joined: Fri Oct 08, 2010 2:25 pm
- Location: Nottingham
- Contact:
Quick update....
I now have sourced a genuine top fairing in tatty condition so in time i`ll get that painted up and ready to go on.
I painted and reconned my calipers
have sourced and had powdercoated another swingarm Thanks to Mark Jordan and a few odds and sods inc KR1s handlebar mounts.
Had some original looking bars made up by sprint engineering
took a bucket load to get re electroplated
got another bucket load to go for aqua blasting.
Had some new exhaust to silencer flanges made to fit the new silencers on from TYGA performance through ebay.
more pics will come again in the new year
I now have sourced a genuine top fairing in tatty condition so in time i`ll get that painted up and ready to go on.
I painted and reconned my calipers
have sourced and had powdercoated another swingarm Thanks to Mark Jordan and a few odds and sods inc KR1s handlebar mounts.
Had some original looking bars made up by sprint engineering
took a bucket load to get re electroplated
got another bucket load to go for aqua blasting.
Had some new exhaust to silencer flanges made to fit the new silencers on from TYGA performance through ebay.
more pics will come again in the new year
-
- Light Smoker
- Posts: 28
- Joined: Fri Oct 08, 2010 2:25 pm
- Location: Nottingham
- Contact:
Thanks mate,
Ah well, I`m cheating...
the pics are of them after i painted them and heat proof lacquered them in the cold workshop looked great but the laquer wouldnt set and i kept marking them i dont know if i was supposed to bake them or wat!
So i`ve now too them for powdercoating!
Thanks for the compliment on the flanges!
I originally built the bike before coming on here and what some of you boys have done is very inspiring and has taught me loads!
I`m only 24 and my first restoration never reralised i could get so into it!
Ah well, I`m cheating...
the pics are of them after i painted them and heat proof lacquered them in the cold workshop looked great but the laquer wouldnt set and i kept marking them i dont know if i was supposed to bake them or wat!
So i`ve now too them for powdercoating!
Thanks for the compliment on the flanges!
I originally built the bike before coming on here and what some of you boys have done is very inspiring and has taught me loads!
I`m only 24 and my first restoration never reralised i could get so into it!
-
- Light Smoker
- Posts: 28
- Joined: Fri Oct 08, 2010 2:25 pm
- Location: Nottingham
- Contact:
Top yoke aqua blasted and laquered.
Had 2 new bars made by sprint engineering and had the holders blasted too.
Ordered some more exhaust hangars with more clearance i just googled 60mm p clips and im hoping theyll do the job the current ones are just touching the rear hangers.
Also had a lot zinc plate and some parts done olive drab too.
Genuine exhaust nuts i got with the bike!
Painted and vht lacquered the exhausts same with rad.
Please see my wanted post to see what parts i still need and i'll need them in good nick too please reconditioning things is hard work!
- Howie
- Avgas Sniffer
- Posts: 2055
- Joined: Mon Mar 16, 2009 9:33 pm
- Location: East Yorkshire
Yes it is but don't you just love it when you take a crusty piece of metal, spend an hour or so on it & it still looks like a crusty piece of metal, so you spend another hour on it & it ends up looking like it just left the factory (or better )reconditioning things is hard work!
I think you're doing a fantastic job, cannot wait to see the finished bike
-
- Oil Injector
- Posts: 926
- Joined: Sat Mar 22, 2008 5:42 pm
- Location: retford n,nott`s working in cotswolds
- Contact:
-
- Light Smoker
- Posts: 28
- Joined: Fri Oct 08, 2010 2:25 pm
- Location: Nottingham
- Contact:
- Tambo
- Heavy Smoker
- Posts: 441
- Joined: Tue Sep 12, 2006 9:10 pm
- Location: Scottish Borders
=D> =D> Nice work Hego. The quality of restoration keeps getting higher on here.
Notice you've got a nice straight fairing bracket (very rare) - any chance you could measure the width ? Also, can you tell me how the fairing nut sits in relation to the frame mounts ? I think it's meant to be centred, in line with the frame mounts bolts, but mine are so twisted it's hard to tell
Keep the pics coming.
Tommy
Notice you've got a nice straight fairing bracket (very rare) - any chance you could measure the width ? Also, can you tell me how the fairing nut sits in relation to the frame mounts ? I think it's meant to be centred, in line with the frame mounts bolts, but mine are so twisted it's hard to tell
Keep the pics coming.
Tommy
Kr1s c3, vfr750fg, Dnepr MT11, Pegaso 650