finally started
-
- Heavy Smoker
- Posts: 364
- Joined: Wed Jun 03, 2009 9:12 pm
- Location: rochester kent
IN PROGRESS
well as things progress the more parts i am finding cross over from the GPZ305 i.e speedo cable, interlock diode block, sidestand switch and a host of other bits always good for us UK owners. any one got a clutch lever switch for sale?
1984 Kawasaki KR250A
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
- Top-shaggy
- Premix Junkie
- Posts: 1966
- Joined: Mon Oct 31, 2011 11:09 pm
- Location: Derbyshire
Re: IN PROGRESS
And you will also find that quite a few GPZ305 parts cross over to the early AR125 too like sidestand switch, speedo cable, clock casings, rev counter and cable, frame bungs, panel rubbers etc Which is useful.dougindoors wrote:well as things progress the more parts i am finding cross over from the GPZ305 i.e speedo cable, interlock diode block, sidestand switch and a host of other bits always good for us UK owners.
In fact if you want a 120mph speedo (std is 90mph) in your early AR125 the GPZ305 clocks a straight swap and works fine with AR front wheel drive gear.
If it takes more than 2strokes then your just playing at it..
-
- Heavy Smoker
- Posts: 364
- Joined: Wed Jun 03, 2009 9:12 pm
- Location: rochester kent
movin on a bit
a bit of progress ,was hoping to have her running this weekend but the grass was almost a foot tall, so this is as far as i have got
1984 Kawasaki KR250A
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
-
- Heavy Smoker
- Posts: 364
- Joined: Wed Jun 03, 2009 9:12 pm
- Location: rochester kent
outside
out side after 3 years if the weathers good sunday gonna run her up (i hope)
1984 Kawasaki KR250A
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
-
- Heavy Smoker
- Posts: 364
- Joined: Wed Jun 03, 2009 9:12 pm
- Location: rochester kent
more
on the earole again LH riser needed have a bent one swops need some thing?
1984 Kawasaki KR250A
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
-
- Oil Injector
- Posts: 926
- Joined: Sat Mar 22, 2008 5:42 pm
- Location: retford n,nott`s working in cotswolds
- Contact:
-
- Heavy Smoker
- Posts: 364
- Joined: Wed Jun 03, 2009 9:12 pm
- Location: rochester kent
plastic sticky out bit
375 thats the coolant expansion tank
1984 Kawasaki KR250A
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
-
- Heavy Smoker
- Posts: 364
- Joined: Wed Jun 03, 2009 9:12 pm
- Location: rochester kent
bike bench
its not untill you have one you realise how did you manage with out one but one now no more bad backs
1984 Kawasaki KR250A
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
-
- Heavy Smoker
- Posts: 364
- Joined: Wed Jun 03, 2009 9:12 pm
- Location: rochester kent
Re: bike bench
SORTED THE SPELLING OUTdougindoors wrote:its not untill you have one, you realise how did you manage with out one. Buy one now no more bad backs and crawling on the floor
1984 Kawasaki KR250A
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
- the KR kid
- Heavy Smoker
- Posts: 433
- Joined: Thu May 03, 2007 9:55 am
Re: plastic sticky out bit
Fits right behind the belly pan, was nowhere else to put it. Things are in the strangest places on these bikes, haha!dougindoors wrote:375 thats the coolant expansion tank
Nice work Doug, coming along nicely.
Stop annoying me, I'm running out of space to hide the bodies!
GS750B
KH250B5
GS750B
KH250B5
- Top-shaggy
- Premix Junkie
- Posts: 1966
- Joined: Mon Oct 31, 2011 11:09 pm
- Location: Derbyshire
- the KR kid
- Heavy Smoker
- Posts: 433
- Joined: Thu May 03, 2007 9:55 am
- ScottaKR
- Premix Junkie
- Posts: 1521
- Joined: Fri Aug 10, 2007 2:52 pm
- Location: Australia
True that. But that changes if you fit a set of clip-ons below the top yoke.the KR kid wrote:If you get one be prepared for a more relaxed riding position, as it's more upright than a KR1/KR1S.
KR250 Tandem Twin (Naked)
KR1 Red/White
KR1S Track Bike (has been put on hold for now)
ZXR750 H1 (Winter project)
KR1 Red/White
KR1S Track Bike (has been put on hold for now)
ZXR750 H1 (Winter project)