Page 1 of 1
kr250 fuel tap
Posted: Thu Mar 31, 2011 8:44 pm
by dougindoors
hi any one got a spare fuel tap or the spring washer that goes between the plate and tap face ??/ cheers
fuel tap again
Posted: Fri Apr 01, 2011 8:11 pm
by dougindoors
ok then, does any one know if there are any alternative taps for the kr250.
the gpz500 or ex500 looks the same, but does anyone know if the mounting holes are the same hole centres. [-o<
Posted: Fri Apr 01, 2011 11:57 pm
by ScottaKR
Well the KR1/1S tap is almost identical, and most all parts from it are interchangable, so you could ask in the parts wanted for one from a KR1/1S. This also means that any tap that fits the KR1/1S will also fit (theoretically) the Tandem Twin, if that helps.
tap
Posted: Sat Apr 02, 2011 12:30 am
by dougindoors
cheers scott rgds doug
Posted: Sat Apr 02, 2011 7:58 am
by 250 drummie
I was missing the tap for mine as well. I went down to the wreckers with the tank and got one to do the job. dont know what it is off it might even be a KR tap but it does the job.
fuel tap
Posted: Tue Apr 05, 2011 9:00 pm
by dougindoors
just for the record the kawasaki ex500 and gpz 500 taps fit kr250's you just need to drill out for the 2nd outlet, 2nd hand and in good condition £10 =D>