almost. I thinck Blade uses M8 bolts, KR1S has 10mm holes. So you either need to have bushes to fill the holes, or you make a 10mm thread in the calipersblanc wrote:By using the kr1s outer tubes will the blade calipers just bolt up?
BUDGET CLASSIC RACE/TRACK BIKE BUILD: 88 KR1 250
- JanBros
- Avgas Sniffer
- Posts: 3306
- Joined: Wed Jul 26, 2006 11:50 pm
- Location: the land of Francorchamps
- JanBros
- Avgas Sniffer
- Posts: 3306
- Joined: Wed Jul 26, 2006 11:50 pm
- Location: the land of Francorchamps
-
- Heavy Smoker
- Posts: 101
- Joined: Thu Jul 07, 2011 8:49 pm
- Location: Co Kildare, Ireland.
UPDATE: STRIPPED THE FORKS AND SHOCK FROM THE FRAME.
The shock is rusted and blown and one of the forks is bent like a banana. Going to get a set of kr1s forks,on the lookout.
Cleaned the steering head bearings and regreased them, cleaned the shock linkage and will repack with grease.
Cleaned and primed the fairing stay, removed the speedo.
The shock is rusted and blown and one of the forks is bent like a banana. Going to get a set of kr1s forks,on the lookout.
Cleaned the steering head bearings and regreased them, cleaned the shock linkage and will repack with grease.
Cleaned and primed the fairing stay, removed the speedo.
To fail is to not to have tried at all.....Push your boundaries!
- pablo
- Premix Junkie
- Posts: 1546
- Joined: Fri Nov 14, 2008 9:37 pm
- Location: Co Durham
Good luck with the KR1 mate you've took a lot on there.
here are the discs that fit the KR1s.
brake disc other models
kr-1s (kr250 c2/c3) , 90-92'
zxr250 (zx250 a1/a2) , 89-90'
zxr250r (zx250 b1/b2) , 89-90'
zrx400 (zr400 e1/e2) , 94-95'
zrx400 e3 (zr400 e3) , 96'
zrx400 (zx400 e4/5/6/7) , 98-01'
zrx400 h1/h2 , 89-90'
zxr400 r (zxr400 j1) , 89'
zxr400 r (zx400 j2) , 90'
zz-r400 (zx400 k1/k2/k3) , 90-92'
zz-r400 (zx400 n1-n7) , 93-99'
zr550 b2/b3 "zephyr" , 91-93'
zr550 b4-b6 "zephyr" , 94-99'
zx-6r (zx600 f1-f3) , 95-97'
zr750 c1-c5 "zephyr" , 92-95'
zr750 d1 "zephyr" , 96-98'
gpz900 r a7/a8 , 90-96'
gpz900 r (zx900 a11) , 98'
zg1000 a9-a18 (1000 gtr) , 94-03'
gpz1100 e1/e2 , 95-97'
here are the discs that fit the KR1s.
brake disc other models
kr-1s (kr250 c2/c3) , 90-92'
zxr250 (zx250 a1/a2) , 89-90'
zxr250r (zx250 b1/b2) , 89-90'
zrx400 (zr400 e1/e2) , 94-95'
zrx400 e3 (zr400 e3) , 96'
zrx400 (zx400 e4/5/6/7) , 98-01'
zrx400 h1/h2 , 89-90'
zxr400 r (zxr400 j1) , 89'
zxr400 r (zx400 j2) , 90'
zz-r400 (zx400 k1/k2/k3) , 90-92'
zz-r400 (zx400 n1-n7) , 93-99'
zr550 b2/b3 "zephyr" , 91-93'
zr550 b4-b6 "zephyr" , 94-99'
zx-6r (zx600 f1-f3) , 95-97'
zr750 c1-c5 "zephyr" , 92-95'
zr750 d1 "zephyr" , 96-98'
gpz900 r a7/a8 , 90-96'
gpz900 r (zx900 a11) , 98'
zg1000 a9-a18 (1000 gtr) , 94-03'
gpz1100 e1/e2 , 95-97'
"Turned out nice again"
-
- Heavy Smoker
- Posts: 101
- Joined: Thu Jul 07, 2011 8:49 pm
- Location: Co Kildare, Ireland.
- ScottaKR
- Premix Junkie
- Posts: 1521
- Joined: Fri Aug 10, 2007 2:52 pm
- Location: Australia