Time for a freshen up.

Show us that box of bits in your shed!
User avatar
tescr500
Oil Injector
Posts: 742
Joined: Sat Aug 29, 2009 12:05 pm
Location: hampshire

Post by tescr500 »

where did you get your paint from 375, also i can't believe how lucky i was with my swing arm bolt and besides every other bolt to as it was outside for 10 years and only 1 bolt snapped lucky, paints looking good and for a hastle free i would just remove air box to get shock out cheers wayne
No Matter How Messy Things Get You Can Always Clean Them Up.
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
375
Premix Junkie
Posts: 1305
Joined: Fri Apr 18, 2008 9:41 pm
Location: Essex. Depeche Mode, Town

Post by 375 »

Took my wheel to a car paint shop on Canvey island (Essex).
They don't have a web site (under construction)i had two cans colour matched to the wheel £12.50 a can
wish i got three so i had a spare as it took one can per wheel and twelve coats a thin paint but after coat seven it builds up good.

Need to get the shock serviced next, but who to use?
User avatar
tescr500
Oil Injector
Posts: 742
Joined: Sat Aug 29, 2009 12:05 pm
Location: hampshire

Post by tescr500 »

cool, ive just ordered some 2 pack thinners hardeners primer and at the end of all that could only afford 1 ltr of 2 pack black gloss,costs alot but quality stuff, but that will get me under way have to get all the green next month, but going to spray all the panels fairing etc myself, could be good could be a disaster cheers
No Matter How Messy Things Get You Can Always Clean Them Up.
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
Jnaus
Heavy Smoker
Posts: 156
Joined: Wed Aug 11, 2010 1:47 pm
Location: Melbourne, Australia

Post by Jnaus »

What did you use to get the swing arm bolt in the end?.... Other then a big hammer!
I used numerous bottles alcohol and the opinions of 2 mates!
375
Premix Junkie
Posts: 1305
Joined: Fri Apr 18, 2008 9:41 pm
Location: Essex. Depeche Mode, Town

Post by 375 »

Jnaus wrote:What did you use to get the swing arm bolt in the end?.... Other then a big hammer!
I used numerous bottles alcohol and the opinions of 2 mates!
I tired big hammer and lots of swearing for about an hour with no luck
just would not budge,

mr b suggested putting the nut half back on and put
a socket on each end then keep hitting hard about 5 times each side with copper hammer to break the rust up inside. I thought no way its stuck fast
but after about an hour, 1/2 and a cuppa + swearing it started to move about 2mm kept spraying wd40 to help it on its way and eventually it came out :D

I had ringing in my ears and jaw ache from all the banging and gritting my teeth :lol:
Jnaus
Heavy Smoker
Posts: 156
Joined: Wed Aug 11, 2010 1:47 pm
Location: Melbourne, Australia

Post by Jnaus »

Swearing must be the key! That's what got mine out, well the a scissor jack and the door frame in my garage.
Image
375
Premix Junkie
Posts: 1305
Joined: Fri Apr 18, 2008 9:41 pm
Location: Essex. Depeche Mode, Town

Post by 375 »

I done a search and saw your post, that was my next trick.
375
Premix Junkie
Posts: 1305
Joined: Fri Apr 18, 2008 9:41 pm
Location: Essex. Depeche Mode, Town

Post by 375 »

A few pictures from the Italian GP Misano 2011, Was a great weekend.
Scott redding/Bradley smith/Danny kent and me, sorry my son :lol:

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
375
Premix Junkie
Posts: 1305
Joined: Fri Apr 18, 2008 9:41 pm
Location: Essex. Depeche Mode, Town

Post by 375 »

Picked up a better lower fairing/tail unit which will be going on. :D
wheels on,new chain and sprockets, air filter.

Swinger/shock links resprayed,some new swinger bearings and shock rebuilt by professor of this forum a few small bits to spray and get some pads and it should be finished for now.

Colour as come out faded for some reason.?bloody camera

Image
Image
Image
Image
Last edited by 375 on Mon Nov 14, 2011 5:34 pm, edited 3 times in total.
Luders
Avgas Sniffer
Posts: 3926
Joined: Fri Jun 18, 2010 11:29 am
Location: Oxfordshire

Post by Luders »

Looking good and satisfying too I imagine.
375
Premix Junkie
Posts: 1305
Joined: Fri Apr 18, 2008 9:41 pm
Location: Essex. Depeche Mode, Town

Post by 375 »

Image
Image
Image
Image
Image
Image

Finished for now, took it up the road for quick spin,( no mot)

Had trouble with rear brake seals" pattern" but genuine seals done the job
A few bolts to change here and there and wipe over with a rag, job done \:D/
Had a few parts of some members on the forum. Thank you

(Picture colour has come out faded as santa did not bring me a new camera)
Last edited by 375 on Tue Dec 27, 2011 6:41 pm, edited 1 time in total.
User avatar
KFOR
Heavy Smoker
Posts: 351
Joined: Tue Oct 18, 2011 9:02 pm
Location: Somerset

Post by KFOR »

Great photos ..looks like a top job =P~
KR1SCHR1S
Light Smoker
Posts: 31
Joined: Tue Nov 13, 2012 8:37 pm

Post by KR1SCHR1S »

VALE!!!

You got close to the action. VIP Pass?

I was in Mugello in '08 to see Vale win and brought the limited edition "face" helmet as a keeps sake!

Nothing like an Italian MotoGP!

Lets hope 2013 will see Vale back at the top.

Number 10 here we come!
375
Premix Junkie
Posts: 1305
Joined: Fri Apr 18, 2008 9:41 pm
Location: Essex. Depeche Mode, Town

Post by 375 »

Hi chris,
No not vip just at the end of the race they let everyone on the track \:D/
that was 2012.

Went again this year and watched Rea in action :D

Watching Rossi get second and the Italians going mad was something to see.
This year we were on the back row in the Rossi fan club you can't miss us on tv we had a Union Jack :mrgreen: clipped to the board behind us.

Thinking of going Mugello next year.
Ernest borgnine.

Best film, The Vikings
garye345
Premix Junkie
Posts: 1231
Joined: Tue Nov 13, 2007 8:52 pm
Location: Yorkshire
Contact:

Post by garye345 »

Lovely job there 375!
I would be well chuffed if that was in my shed,should be proud of yerself.
I do like that colour scheme,probly as rare as the red one.
=D>
I used to be so care less,as if i could'nt careless.
Post Reply