KR1 Restoration
-
- Premix Junkie
- Posts: 1328
- Joined: Fri Apr 18, 2008 8:25 am
- Location: Solihull
Now I have a pair of NOS KR1 Pipes
Don't see this very often.
Don't see this very often.
Last edited by Bertie_Mollie on Fri Dec 22, 2017 11:58 am, edited 1 time in total.
GWB KR1s C2 - Now gone
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
-
- Premix Junkie
- Posts: 1328
- Joined: Fri Apr 18, 2008 8:25 am
- Location: Solihull
Hi All,
Been slow (again) on this build but brief update.
Forks now re built with new dust seals, seals, bushes, re chromed stanchions, new pre poad adjusters and triple S powder coated lowers.
Engine cases are with NOS EXUP for vapour blasting.
BM
Been slow (again) on this build but brief update.
Forks now re built with new dust seals, seals, bushes, re chromed stanchions, new pre poad adjusters and triple S powder coated lowers.
Engine cases are with NOS EXUP for vapour blasting.
BM
Last edited by Bertie_Mollie on Fri Dec 22, 2017 11:58 am, edited 1 time in total.
GWB KR1s C2 - Now gone
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
-
- Premix Junkie
- Posts: 1328
- Joined: Fri Apr 18, 2008 8:25 am
- Location: Solihull
Re: KR1 Restoration
Made a bit of progress recently. Not a lot more I can do other than start putting the engine back together and then brakes.
Sorry about the pictures, they were done on my phone
Sorry about the pictures, they were done on my phone
Last edited by Bertie_Mollie on Fri Dec 22, 2017 12:01 pm, edited 1 time in total.
GWB KR1s C2 - Now gone
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
-
- Oil Injector
- Posts: 706
- Joined: Sat Aug 08, 2009 9:29 pm
- Location: the netherlands
-
- Premix Junkie
- Posts: 1328
- Joined: Fri Apr 18, 2008 8:25 am
- Location: Solihull
Re: KR1 Restoration
Thanks Jarno.jarno wrote:looking great =D>
I have just seen your Zeus blue engine. Now that is clean
Cheers
Andrew
GWB KR1s C2 - Now gone
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
-
- Oil Injector
- Posts: 706
- Joined: Sat Aug 08, 2009 9:29 pm
- Location: the netherlands
Re: KR1 Restoration
did not beleave it when i saw the parts coming out of the ultrasonic cleaner.
it must be a low milage bike (9874 km on the speedo) never saw engine parts came out that clean exept for cabs.
i know now that the engine was never opened before because the wrong type of pistons came out of the engine and the ware green coated.
i won't restore it as beautiful as your kr1 i wil only clean and service it i want it to be as original as possible.
it must be a low milage bike (9874 km on the speedo) never saw engine parts came out that clean exept for cabs.
i know now that the engine was never opened before because the wrong type of pistons came out of the engine and the ware green coated.
i won't restore it as beautiful as your kr1 i wil only clean and service it i want it to be as original as possible.
Kr1s C1 zeus blue
Kr1s c2 black green
ZXR400 SP
ZXR250A
Kr1s c2 black green
ZXR400 SP
ZXR250A
- tescr500
- Oil Injector
- Posts: 742
- Joined: Sat Aug 29, 2009 12:05 pm
- Location: hampshire
Re: KR1 Restoration
Hi Bertie what size tyres do you have on the kr1 and where from cheers wayne.
No Matter How Messy Things Get You Can Always Clean Them Up.
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
-
- Premix Junkie
- Posts: 1328
- Joined: Fri Apr 18, 2008 8:25 am
- Location: Solihull
Re: KR1 Restoration
hi Wayne,
Tyres are BT90's. Front is a 110 and rear 150. Can't check exact details at the mo as she is in the naughty corner at the back of the shed .
Selling a couple of bike so she can come out to play.
When I get a chance I'll get you full details.
This is where I got them http://www.tyretectrading.com/store/lis ... tegory=144
Andrew
Tyres are BT90's. Front is a 110 and rear 150. Can't check exact details at the mo as she is in the naughty corner at the back of the shed .
Selling a couple of bike so she can come out to play.
When I get a chance I'll get you full details.
This is where I got them http://www.tyretectrading.com/store/lis ... tegory=144
Andrew
GWB KR1s C2 - Now gone
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
- tescr500
- Oil Injector
- Posts: 742
- Joined: Sat Aug 29, 2009 12:05 pm
- Location: hampshire
Re: KR1 Restoration
Hi Andrew cheers for that
No Matter How Messy Things Get You Can Always Clean Them Up.
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
-
- Premix Junkie
- Posts: 1328
- Joined: Fri Apr 18, 2008 8:25 am
- Location: Solihull
Re: KR1 Restoration
Hi All,
Bottom end built up with rebuilt crank by SEP and vapour blasted cases from CC Aqua blasting. Pistons just been ordered and barrels will go off for a replate when they arrive.
Cheers
Andrew
Bottom end built up with rebuilt crank by SEP and vapour blasted cases from CC Aqua blasting. Pistons just been ordered and barrels will go off for a replate when they arrive.
Cheers
Andrew
Last edited by Bertie_Mollie on Fri Dec 22, 2017 12:01 pm, edited 1 time in total.
GWB KR1s C2 - Now gone
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
- tescr500
- Oil Injector
- Posts: 742
- Joined: Sat Aug 29, 2009 12:05 pm
- Location: hampshire
Re: KR1 Restoration
Don't you just love an engine on the table, fantastic ornament to have in any house hold, nice work Andrew.
No Matter How Messy Things Get You Can Always Clean Them Up.
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
-
- Premix Junkie
- Posts: 1328
- Joined: Fri Apr 18, 2008 8:25 am
- Location: Solihull
Re: KR1 Restoration
Thanks Wayne.
Engine in the utility room, pipes under the spare bed, bodywork in the loft.
I'd like to have the rest in the house too but it ain't gonna happen.
LOL.
I stayed in a bedsit once for a short period before I moved to the midlands. The guy who owned the house was / is a classic car enthusiast. He had scrapped a few MG's in the past and had parts around the hose as ornaments which had the MG logo.
He also had a original Austin clocking in machine from the Longbridge car plant.
Engine in the utility room, pipes under the spare bed, bodywork in the loft.
I'd like to have the rest in the house too but it ain't gonna happen.
LOL.
I stayed in a bedsit once for a short period before I moved to the midlands. The guy who owned the house was / is a classic car enthusiast. He had scrapped a few MG's in the past and had parts around the hose as ornaments which had the MG logo.
He also had a original Austin clocking in machine from the Longbridge car plant.
GWB KR1s C2 - Now gone
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
- Binetta Steve
- Oil Injector
- Posts: 949
- Joined: Sat Nov 10, 2012 6:13 pm
- Location: North Wales
Re: KR1 Restoration
Collected my 1s engine from Martin earlier this year. Stayed in a B&B in Birmingham on way home. Didnt trust the area, so asked owner could i keep the engine in the room. He was most amused but let me do it. He even commented his cleaner had asked " why is there an engine in a yellow box in this mans room ?
- tescr500
- Oil Injector
- Posts: 742
- Joined: Sat Aug 29, 2009 12:05 pm
- Location: hampshire
Re: KR1 Restoration
LOL. Well at this moment wheels in the loft the newly sprayed ones, the bones are in the conservatory and the body work is in the kitchen stacked on the new kitchen units, which means the bike gets done before the kitchen. Speaking of me bike not a lot to do will be posting up some photo's any day now, but keep us up to speed Andrew look forward to seeing more cheers Wayne.
No Matter How Messy Things Get You Can Always Clean Them Up.
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
-
- Premix Junkie
- Posts: 1328
- Joined: Fri Apr 18, 2008 8:25 am
- Location: Solihull
Re: KR1 Restoration
Last edited by Bertie_Mollie on Fri Dec 22, 2017 12:02 pm, edited 1 time in total.
GWB KR1s C2 - Now gone
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum