Project KR1SS - So far
-
- Heavy Smoker
- Posts: 199
- Joined: Wed Dec 16, 2009 9:41 pm
- Location: Shetland
Re: Project KR1SS - So far
Here's an odd question Gary,
My barrels seem to be different lengths requiring me to run two base gaskets to even it out.
Did you get your barrels machined to be the same lenght and then do the ports on it?
Might as well ask you pair, as the forum seems quiet right now, except your thread!!
Cheers from a very jealous Martin.
My barrels seem to be different lengths requiring me to run two base gaskets to even it out.
Did you get your barrels machined to be the same lenght and then do the ports on it?
Might as well ask you pair, as the forum seems quiet right now, except your thread!!
Cheers from a very jealous Martin.
-
- Oil Injector
- Posts: 872
- Joined: Mon Sep 07, 2009 8:33 pm
- Location: east yorkshire
Re: Project KR1SS - So far
Martin,
I'd be interested to hear the spec as i'm sure others would too.
Dan
I'd be interested to hear the spec as i'm sure others would too.
Dan
- JanBros
- Avgas Sniffer
- Posts: 3306
- Joined: Wed Jul 26, 2006 11:50 pm
- Location: the land of Francorchamps
Re: Project KR1SS - So far
yes Marty, best is to have your barrels machined so they both have the same height.
placing more gasketts under one results in that your barrels have slightly different timings.
placing more gasketts under one results in that your barrels have slightly different timings.
My ultimate goal is to die young as late as possible !
- JanBros
- Avgas Sniffer
- Posts: 3306
- Joined: Wed Jul 26, 2006 11:50 pm
- Location: the land of Francorchamps
Re: Project KR1SS - So far
if you want to go on, I can to ...martin wrote: but maybe this whole thing about brake horse power figures has really been about
dick size
despite what certaian negatve people say,
it does make me smile that this bike is the most powerfull kr1s out there.
and yet people don't want to ask questions about the spec of this bike dispite it being in class mechanics magazine
I agree with you it's about dick sizes. it's you that keeps on mentioning yours is the biggest and as I am not interested in the size of your dick I'm not going to ask for it's size.
My ultimate goal is to die young as late as possible !
-
- Avgas Sniffer
- Posts: 3926
- Joined: Fri Jun 18, 2010 11:29 am
- Location: Oxfordshire
Re: Project KR1SS - So far
I'm not interested in dick size either, but am interested in the bike/tune.
Here are some questions to get us going.
What are the port timings and transfer heights?
On the 300, is it on a standard crank, or is stroked?
What pistons do they use and what weight and shape are they?
Did you do anything on the inlet side?
Have you changed anything on the resonator chamber volumes?
What is the torque curve like and max output?
Has there been any flywheel lightening like Bernies?
Here are some questions to get us going.
What are the port timings and transfer heights?
On the 300, is it on a standard crank, or is stroked?
What pistons do they use and what weight and shape are they?
Did you do anything on the inlet side?
Have you changed anything on the resonator chamber volumes?
What is the torque curve like and max output?
Has there been any flywheel lightening like Bernies?
-
- Oil Injector
- Posts: 872
- Joined: Mon Sep 07, 2009 8:33 pm
- Location: east yorkshire
Re: Project KR1SS - So far
Squish clearance, squish area ratio, compression ratio would also be of interest.
Is the airbox standard?
Dan
Is the airbox standard?
Dan
-
- Oil Injector
- Posts: 590
- Joined: Thu Dec 12, 2013 9:58 pm
- Location: York
Re: Project KR1SS - So far
Have you had to do anything to the clutch/had any problems with slip?
-
- Avgas Sniffer
- Posts: 3926
- Joined: Fri Jun 18, 2010 11:29 am
- Location: Oxfordshire
Re: Project KR1SS - So far
Any updates to the questions Martin? We're all in suspense here...
- JanBros
- Avgas Sniffer
- Posts: 3306
- Joined: Wed Jul 26, 2006 11:50 pm
- Location: the land of Francorchamps
Re: Project KR1SS - So far
My ultimate goal is to die young as late as possible !
- gary
- Smoker
- Posts: 72
- Joined: Tue Dec 21, 2010 11:57 pm
- Location: luton
Re: Project KR1SS - So far
Hi, decided to upgrade my coil the other day. Nothing wrong with my old coil but because of the engine tune I have decided to upgrade. Fitted this mini dyna high voltage ignition coil with Taylor 8mm ignition leads. Has double the voltage of the standard coil, will give me smoother running & better combustion. =D>
-
- Oil Injector
- Posts: 590
- Joined: Thu Dec 12, 2013 9:58 pm
- Location: York
Re: Project KR1SS - So far
Looks like a good fit, let us know how it goes.
-
- Heavy Smoker
- Posts: 420
- Joined: Fri Sep 19, 2014 6:44 pm
- Location: South Manchester
- Top-shaggy
- Premix Junkie
- Posts: 1966
- Joined: Mon Oct 31, 2011 11:09 pm
- Location: Derbyshire
Re: Project KR1SS - So far
Looks like a great mod, please let us know how it runs
Liking that !
Liking that !
If it takes more than 2strokes then your just playing at it..
-
- Smoker
- Posts: 58
- Joined: Tue Sep 01, 2015 1:23 pm
Re: Project KR1SS - So far
I love that nice trick Dyna coil! It's got me wondering if they make a single output one I could make fit onto my KMX maybe? I'm liking all these trick KR1S engine builds and bike projects immensely too!
- scooble
- Premix Junkie
- Posts: 1549
- Joined: Thu Jul 27, 2006 12:47 pm
- Location: West Sussex
- Contact:
Re: Project KR1SS - So far
also looking to upgrade mine for racing, so please keep us posted