Project KR1SS - So far
- tescr500
- Oil Injector
- Posts: 742
- Joined: Sat Aug 29, 2009 12:05 pm
- Location: hampshire
Re: Project KR1SS - So far
Hi Martin that's looking great, I think I would like to get mine on the dyno when its done, not long now, 375 thinks it's a vampire. But yes be interested to know what its pulling at, look forward to that. I'm also thinking of making a custom set of pipes at work out of ss, but that'll be as in when, great work though
No Matter How Messy Things Get You Can Always Clean Them Up.
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
- martin
- Premix Junkie
- Posts: 1610
- Joined: Sat Jan 13, 2007 10:35 pm
- Location: luton,beds
Re: Project KR1SS - So far
well. me and gary have been busy. still lots to do. but nearly there.
jobs to do still, are.
remove the horrible rear disc once the bike has been set up on the dyno. [as dave wood racing kicks the arse out of the rear disc on the dyno]
fit fairing and bellypan once the new mirrors arrive from z power,
fit new footrests.
and then a good old polish. [bet that bit will please bernie the polishing will be done at home Bernie. and not in a back
street hotel room
jobs to do still, are.
remove the horrible rear disc once the bike has been set up on the dyno. [as dave wood racing kicks the arse out of the rear disc on the dyno]
fit fairing and bellypan once the new mirrors arrive from z power,
fit new footrests.
and then a good old polish. [bet that bit will please bernie the polishing will be done at home Bernie. and not in a back
street hotel room
Last edited by martin on Sun Feb 23, 2014 10:51 pm, edited 1 time in total.
current bikes
fully restored green/white kr1 b2
fully restored green/white kr1 b2
- 500bernie
- Avgas Sniffer
- Posts: 3397
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: Project KR1SS - So far
Looking good
I can see I have some work to do to get my bike up to the standard of yours Gary.
I can see I have some work to do to get my bike up to the standard of yours Gary.
Firecracker Red and Grey C3 300
-
- Oil Injector
- Posts: 872
- Joined: Mon Sep 07, 2009 8:33 pm
- Location: east yorkshire
Re: Project KR1SS - So far
Looks fantastic! The only thing i would say is i'm not sure the standard rad will be upto the job of keeping it cool. When i had my kr on the dyno the temp was in the low 70's and it was only making 47bhp. Just something go bear in mind anyway.
Dan
Dan
- martin
- Premix Junkie
- Posts: 1610
- Joined: Sat Jan 13, 2007 10:35 pm
- Location: luton,beds
Re: Project KR1SS - So far
yeah, I have thought of that dan. am looking in to getting another rad [anyone wanting to sell a pace rad or similar] mind you. it should,nt be too bad as I have opened up the waterways in the water pipe and matched the barrels/cylinder head to the head gasket for better water flow.
am looking forward to going on the dyno. am hoping for 65bhp+ [-o<
am looking forward to going on the dyno. am hoping for 65bhp+ [-o<
current bikes
fully restored green/white kr1 b2
fully restored green/white kr1 b2
- RalfK
- Light Smoker
- Posts: 40
- Joined: Sat Dec 23, 2006 9:42 pm
- Location: Germany
- Contact:
- martin
- Premix Junkie
- Posts: 1610
- Joined: Sat Jan 13, 2007 10:35 pm
- Location: luton,beds
Re: Project KR1SS - So far
its alive gary.
I don't think it sounds great on video [shit camera]
but in the flesh it sounds good, and once the throttle gets so far, it wants to go. if this dose,nt give a few horses when we take it to the dyno. I will hang up my spanners, [it was fully warm when I revved it.]
the yzf radiator should be here soon, so will fit that when it arrives,.
[img][IMG]http://i1361.photobucket.com/albums/r67 ... d453e6.jpg[/img][/img]
I don't think it sounds great on video [shit camera]
but in the flesh it sounds good, and once the throttle gets so far, it wants to go. if this dose,nt give a few horses when we take it to the dyno. I will hang up my spanners, [it was fully warm when I revved it.]
the yzf radiator should be here soon, so will fit that when it arrives,.
[img][IMG]http://i1361.photobucket.com/albums/r67 ... d453e6.jpg[/img][/img]
current bikes
fully restored green/white kr1 b2
fully restored green/white kr1 b2
- gary
- Smoker
- Posts: 72
- Joined: Tue Dec 21, 2010 11:57 pm
- Location: luton
Re: Project KR1SS - So far
Wow that going to sound awesome when it comes on pipe, it,s got a deep growl to it. Can,t wait to take it out for a ride, have to look out for some tunnel,s to ride through.
- Top-shaggy
- Premix Junkie
- Posts: 1966
- Joined: Mon Oct 31, 2011 11:09 pm
- Location: Derbyshire
Re: Project KR1SS - So far
Looking forward to seeing the dyno runs.. It's sounds great !!
=D> =D> =D>
=D> =D> =D>
If it takes more than 2strokes then your just playing at it..
-
- Oil Injector
- Posts: 872
- Joined: Mon Sep 07, 2009 8:33 pm
- Location: east yorkshire
-
- Oil Injector
- Posts: 706
- Joined: Sat Aug 08, 2009 9:29 pm
- Location: the netherlands
Re: Project KR1SS - So far
lovely bike Gary sounds great =D>
also looking awesome
also looking awesome
Kr1s C1 zeus blue
Kr1s c2 black green
ZXR400 SP
ZXR250A
Kr1s c2 black green
ZXR400 SP
ZXR250A
- tescr500
- Oil Injector
- Posts: 742
- Joined: Sat Aug 29, 2009 12:05 pm
- Location: hampshire
Re: Project KR1SS - So far
Sounds pretty chunky, sounds good cheers =D> =D> =D>martin wrote:its alive gary.
I don't think it sounds great on video [shit camera]
but in the flesh it sounds good, and once the throttle gets so far, it wants to go. if this dose,nt give a few horses when we take it to the dyno. I will hang up my spanners, [it was fully warm when I revved it.]
the yzf radiator should be here soon, so will fit that when it arrives,.
[img][IMG]http://i1361.photobucket.com/albums/r67 ... d453e6.jpg[/img][/img]
No Matter How Messy Things Get You Can Always Clean Them Up.
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
-
- Avgas Sniffer
- Posts: 3926
- Joined: Fri Jun 18, 2010 11:29 am
- Location: Oxfordshire
Re: Project KR1SS - So far
When are you putting it on the dyno and are you going to Krazy Kat?
- gary
- Smoker
- Posts: 72
- Joined: Tue Dec 21, 2010 11:57 pm
- Location: luton
Re: Project KR1SS - So far
Hi Ben, be about a month or so to dyno day, wife on wed night gave birth to my second son, well happy, want to put some miles on engine first, took it for little spin other day, up and down outside where I live, pulls very well. Do u mean japfest , yes will be going.
-
- Avgas Sniffer
- Posts: 3926
- Joined: Fri Jun 18, 2010 11:29 am
- Location: Oxfordshire
Re: Project KR1SS - So far
Congratulations on your second son.
Krazy Katt is a dyno in Bedford. Quite a few of us go there for our runs. MJ always took his bikes there and I'll be running up my new race bike there.
http://www.krazy-katt.com/dyno.htm
Krazy Katt is a dyno in Bedford. Quite a few of us go there for our runs. MJ always took his bikes there and I'll be running up my new race bike there.
http://www.krazy-katt.com/dyno.htm