KR-1S.co.uk Forum

Hi all ,
Can anyone tell me what is needed in wirering for the KR1 to run , including Power Valves . Dont need any thing like lights , indicators etc ,
Will need ignition and kill switch , charging system is not needed .
Is there any wirering diagrams about or available ?

Cheers Holma ..

on the top left of the forum, you can download the manual and in there is the wiring diagram.

basicly you can cut any wire that goes to the headlights/stoplight/tailight/licenseplate light/blinkers/horn

if it's for racing, you can also cut/rewire ignition switch, sidestand switch, clutch lever switch. And if you wan't to go further and run totaly loss from a battery only, you can also ditch the rectifier/alternator windings (not the 3 smaller taped ones, they are needed for the ignition).