ok. not a kr1. but still a stroker

Show us that box of bits in your shed!
Post Reply
User avatar
martin
Premix Junkie
Posts: 1610
Joined: Sat Jan 13, 2007 10:35 pm
Location: luton,beds

ok. not a kr1. but still a stroker

Post by martin »

a friend of mine [gary from this forum] dropped this Yamaha 250 mono
off to me.
has,nt been used since 1996.
Image
current bikes
fully restored green/white kr1 b2
Top
User avatar
ScottaKR
Premix Junkie
Posts: 1521
Joined: Fri Aug 10, 2007 2:52 pm
Location: Australia

Post by ScottaKR »

Did it arrive minus carb, or have you already put that in the ultrasonic cleaner?
How thorough a rebuild is the bike getting?
KR250 Tandem Twin (Naked) :mrgreen:
KR1 Red/White
KR1S Track Bike (has been put on hold for now)
ZXR750 H1 (Winter project)
Top
User avatar
martin
Premix Junkie
Posts: 1610
Joined: Sat Jan 13, 2007 10:35 pm
Location: luton,beds

Post by martin »

I have the carb.
he wants it like new,
current bikes
fully restored green/white kr1 b2
Top
User avatar
500bernie
Avgas Sniffer
Posts: 3396
Joined: Mon Aug 02, 2010 10:22 am
Location: Teesside

Post by 500bernie »

Nice bike, that will look great when it is finished.
It should be a doddle compaired to a KR.

I still have great memories of my DT125 Enduro Twin Shock MHN628P and my RD400E (White & Red) DUB111T, I wonder where they are now?
Firecracker Red and Grey C3 300
Top
User avatar
gary
Smoker
Posts: 72
Joined: Tue Dec 21, 2010 11:57 pm
Location: luton

Post by gary »

Hi,everyone, the Ty was given to me , as a wedding present, from my best man, got married last Sept. Was going to be my next project., after I finished project kr1ss. But wife is expecting my second child in august, and moving to a bigger house, at end of march, so be doing lots of DIY. Want to finish the kr before I move.
The Ty is a 1988 model, is road registered, and road legal with daytime not.
Top
User avatar
500bernie
Avgas Sniffer
Posts: 3396
Joined: Mon Aug 02, 2010 10:22 am
Location: Teesside

Post by 500bernie »

My best man arranged a very suspect speech :shock:
Firecracker Red and Grey C3 300
Top
User avatar
tescr500
Oil Injector
Posts: 742
Joined: Sat Aug 29, 2009 12:05 pm
Location: hampshire

Post by tescr500 »

hey we had one of these, it only had 3 gears and i think it was just for a speed machine we had it up to 80 top revs in 2nd, when you went into 3rd it would only carry on pulling on a dead flat surface, it was really mad.
Martin when you take apart could you take a close up of the fly wheel stll fitted please? as we had a strange set up and could not get the nut undone cheers.
No Matter How Messy Things Get You Can Always Clean Them Up.
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
Top
User avatar
Top-shaggy
Premix Junkie
Posts: 1966
Joined: Mon Oct 31, 2011 11:09 pm
Location: Derbyshire

Post by Top-shaggy »

500bernie wrote:My best man arranged a very suspect speech :shock:
.
.
.
Bernie your a tease... You will have to tell us all about it sometime ! =D> :lol:
If it takes more than 2strokes then your just playing at it..
Top
mikekr1s
Smoker
Posts: 57
Joined: Mon Oct 24, 2011 6:40 pm
Location: cheshire

Re: ok. not a kr1. but still a stroker

Post by mikekr1s »

Iv'e had 5 of these ranging from s to r's
Top
Post Reply

Return to “Projects”