Wheels, shocks, forks, frame
headcoats
Avgas Sniffer
Posts: 2120 Joined: Sat Jun 09, 2007 10:10 am
Location: Pig on the wall country
Post
by headcoats » Tue Jan 22, 2013 9:16 pm
Any ideas chicklets
Can it yer old boiler
Luders
Avgas Sniffer
Posts: 3926 Joined: Fri Jun 18, 2010 11:29 am
Location: Oxfordshire
Post
by Luders » Tue Jan 22, 2013 10:02 pm
I can measure one tomorrow Martin if no one knows off the top of their head. Might even be in the morning if I get up early enough, no working from home for me this week
KFOR
Heavy Smoker
Posts: 351 Joined: Tue Oct 18, 2011 9:02 pm
Location: Somerset
Post
by KFOR » Tue Jan 22, 2013 10:30 pm
It's amazing how much I can get done in the garage when I'm "working from home" too
nikfubar
Smoker
Posts: 72 Joined: Mon Oct 08, 2012 6:26 pm
Location: Sussex in the pissin rain
Post
by nikfubar » Wed Jan 23, 2013 12:32 am
It's an M16 X 1.5mm
headcoats
Avgas Sniffer
Posts: 2120 Joined: Sat Jun 09, 2007 10:10 am
Location: Pig on the wall country
Post
by headcoats » Wed Jan 23, 2013 12:54 am
Cheers Furby
I must have a different thread on my new longer one i had made for the hybrid
Tried a castle nut which i had off fleabay which the seller said 1.5 pitch but it won't fit
Goes on about 2 threads then no more
Can it yer old boiler
nikfubar
Smoker
Posts: 72 Joined: Mon Oct 08, 2012 6:26 pm
Location: Sussex in the pissin rain
Post
by nikfubar » Wed Jan 23, 2013 8:17 am
1.5mm is quite a fine pitch far an M16, if you had one made they proberbly used a 1.75 or 2.0mm pitch die
headcoats
Avgas Sniffer
Posts: 2120 Joined: Sat Jun 09, 2007 10:10 am
Location: Pig on the wall country
Post
by headcoats » Thu Jan 24, 2013 11:34 pm
Furby is there a 1.25 pitch for an M16 ?
Can it yer old boiler
nikfubar
Smoker
Posts: 72 Joined: Mon Oct 08, 2012 6:26 pm
Location: Sussex in the pissin rain
Post
by nikfubar » Fri Jan 25, 2013 7:49 am