carbs info

buzinc · Post by **buzinc** » Sat Apr 12, 2008 9:27 pm

Hi Guys. Need some carb info. Looked at the manual but dont help
My two stroke knowledge is yam aircooled, this is my first kwack.
Removing the carbs, the L/H and R/H carbs have the float bowl drains on the inside, ie facing each other. Is this correct?

Also why does the R/H have bowden cable to adjust the idle and the L/H usual screw you cant really get at?

Also where to purchase main jets etc.
Also the airfilter foam element - I have a large piece of foam from a sofa! is the oem still available?

Buz

martin · Post by **martin** » Sat Apr 12, 2008 9:47 pm

yes the drain screws are on the inside and the left carb has only the screw that you say, some people get another right side one to make adjusting easier, try allens performance [do a google search] thats where i got my bits from

mr_bungholeo · Post by **mr_bungholeo** » Sun Apr 13, 2008 7:28 am

sean does a very nice pipecross filter on his site... http://www.thetuningworks.com ive bought two...very good..better than standard $\:D/$

buzinc · Post by **buzinc** » Sun Apr 13, 2008 9:54 am

Just had a look at seans site, is it a direct replacement of the kr1 foam element that fits in the air box. Did u have to up jet, if so what sizes

buz

the-elf · Post by **the-elf** » Sun Apr 13, 2008 12:58 pm

The filter is a straight swap.