SUPER TUNED MOTOR

wakasaki · Post by **wakasaki** » Mon Sep 22, 2008 5:05 pm

Ok ...Here is the Finished article..
Fully Tuned Motor
35mm Carbs Air Striker
uprated Jets and Needles
V Force Reeds
New Inlets
Fully Tuned Graham File Engine
polished inlets etc..
shortend inlet assem
new crank rods bearings
Lightend Rotor
New Electrics
New seal bearings
New Clutch Everything
Alt Gearing
new water pump assemble seals
Wossner Forged Pistons
I have disconnected the oil pump
its just there for a blank
new valve assembly all done
it will have a modified airbox
Total Monies ....
and before some say Madness...
it will be worth it..

£2.5k...Yawoooossaa..

new Power valves polished etc..

D.I.Y · Post by **D.I.Y** » Mon Sep 22, 2008 5:09 pm

thats a monster what bhp u reconing

the-elf · Post by **the-elf** » Mon Sep 22, 2008 5:10 pm

Bugger me thats so clean that I need sun glassess on just to look at it =D> =D> =D> =D> =D> =D> =D> =D> =D>

mgtkr1 · Post by **mgtkr1** » Mon Sep 22, 2008 5:12 pm

looks nice. should be reliable after graham worked his magic. did he do the flywheel? saw one recently on ebay but got beat.

wakasaki · Post by **wakasaki** » Mon Sep 22, 2008 5:16 pm

As the lads in the know..
Mgbgt..kr1
Elf etc..and Mj..
Proberly 65ish..Hp
Sauce that is...
Yes the rotor is his...
its about 180gramslighter
than std..and the pistons
are 30grams etc

so ..fingers crossed
the head has beeen
totally reworked..and the squishes
so i hope it will not detonate..

pics when finished..

SHimmer45 · Post by **SHimmer45** » Mon Sep 22, 2008 5:31 pm

looks great.. sure it be reliable as well

for a tuned motor

Bertie_Mollie · Post by **Bertie_Mollie** » Mon Sep 22, 2008 10:20 pm

OMG, I hate to tell you this. Someone spilt paint on yer pistons

wakasaki wrote:

col · Post by **col** » Tue Sep 23, 2008 6:38 am

when it looks that good i dont think you'll find
anyone questioning the cost. Quality isnt cheap.

wakasaki · Post by **wakasaki** » Tue Sep 23, 2008 9:19 am

Thankyou.. Everyone..

Bertie bassett...
Its not paint...its a teflon coating
there Forged Pistons Not casted...
it's to aid the heat transfer when warming up..
as they work to finer tolerances...

paint..... OOOOOhhh i Hate Cheap laughs..

"Good Job Its green Paint then...eh eh hurrrr dorrr"

Post by **alimorg** » Tue Sep 23, 2008 9:27 am

What is the sparkly metallic finish on the clutch cover? looks nice
Cheers
AL

col · Post by **col** » Tue Sep 23, 2008 9:46 am

looks like shotblasted alloy to me

wakasaki · Post by **wakasaki** » Tue Sep 23, 2008 10:14 am

Shotbalsted ali....

Poor Ali....

Nop... its painted...
Met Aluminium..

Same as the frame...

Nice and Shiny.....

G

ScottaKR · Post by **ScottaKR** » Tue Sep 23, 2008 10:23 am

If I'm not mistaken, it's the same paint he used on the K-RR frame.

Going by the detailing done on the motor so far (and your previous projects) it's going to be another work of art.

Can't wait to see the results.

kwackman12 · Post by **kwackman12** » Tue Sep 23, 2008 9:37 pm

Looks a cracking job Waki, so when are we going to see it on the track ?

andyb · Post by **andyb** » Wed Sep 24, 2008 9:59 pm

nice one gary looking good mate

=D>

Andy.

KR-1S.co.uk Forum

SUPER TUNED MOTOR

SUPER TUNED MOTOR

c

Re: SUPER TUNED MOTOR

h

c