Dodgy Kips motor? CDI? battery? diode? reg/rect? its all gobbledygook to me but some people understand it ask tham a question here
pablo
Premix Junkie
Posts: 1546 Joined: Fri Nov 14, 2008 9:37 pm
Location: Co Durham
Post
by pablo » Fri Mar 12, 2010 8:11 pm
Does anyone know how I can stop my Husqvarna WR250 enduro busting stop and tail light bulbs
It's not blowing them,it's not the regulator,It must be vibration.Can't seem to finish a ride with an intact bulb
"Turned out nice again"
THE FLUTE
Heavy Smoker
Posts: 474 Joined: Fri Jul 28, 2006 1:18 pm
Location: Leicester
Post
by THE FLUTE » Fri Mar 12, 2010 8:49 pm
My ktm does the same there is an american company that make LED ones for the ktm I will see if I can find it and let you know. Is yours AC or DC voltage??
Derby Phoenix MCC F600 Novice Champion 2006
2009 F1 British Championship Sidecar Passenger
5th 2011 British Championship F1 sidecar
mr_bungholeo
Premix Junkie
Posts: 1225 Joined: Wed Mar 21, 2007 7:55 pm
Location: braintree
Post
by mr_bungholeo » Fri Mar 12, 2010 8:55 pm
renew the rubbers on the bolts if it a few years old or fit h**da bulbs,they have a bridge between the filament to stop it vibrating to bits...
bring a ding ding i'm a throttle happy chappy...
you cant beat a bit of blue haze...
danny harris.....R.I.P
gone but totally forgotten...
twostrokesmoker
Heavy Smoker
Posts: 209 Joined: Tue Nov 10, 2009 11:24 pm
Location: Lowton, Nr Warrington
Post
by twostrokesmoker » Fri Mar 12, 2010 10:29 pm
Err push it everywere
Bert
Heavy Smoker
Posts: 104 Joined: Wed Nov 25, 2009 7:15 am
Location: Perth Australia
Post
by Bert » Sat Mar 13, 2010 4:03 pm
These guys will probably have a replacement LED to fit
http://www.customdynamics.com/
Bert
pablo
Premix Junkie
Posts: 1546 Joined: Fri Nov 14, 2008 9:37 pm
Location: Co Durham
Post
by pablo » Sat Mar 13, 2010 7:16 pm
THE FLUTE wrote: Is yours AC or DC voltage??
It's DC.I reckon LED looks like the way to go.The're expensive but at the rate I'm getting through bulbs it'll be worth it.
"Turned out nice again"