Here is the KR1S wheel and disc with the RGV 250 lower fork and caliper fitted
Even the KR1S spindle screwed into the left stanchion.
This is far from sussed but could be promising.
No idea of the spacing yet as i need some yokes and the slot for the speedo drive is totaly wrong on the RGV forks
The Kr1S disc sticks out of the RGv pads by about 3mm but it doesn't hit the caliper,the pads on the inner edge are perfectly in line and the inside of the caliper doesn't touch the spokes either.
It is close though but so are the standard KR calipers
Last edited by headcoats on Thu Jun 19, 2014 7:56 am, edited 1 time in total.
headcoats wrote:This strange picture shows the inside of the petrol tank after the POR15 tank sealer has been put in
Could you please show us a pic how it looked before?
thanks,
Charles
It wasn't that bad Charles but i did have big rust flakes come out the tank when i drained it
More a precaution than anything but i would say the sealer will cover quite heavily rusted tanks
Great stuff that,
POR 15 used it on two tanks so far and another tank i cleaned/rinsed with there Degreaser and Metal ready. Brings it up to a great finish and best of all it stops rust [-o<
headcoats wrote:
This strange picture shows the inside of the petrol tank after the POR15 tank sealer has been put in
It is good,that three stage kit has rescued two really manky tanks for me
You gonna leave those exhausts there and look at them for a few days
The Missus said they look like they are made out of scrap
She can't believe i am going to leave them like this
I guess she has seen the polished ones on the other bike
This tank sealer is also resistant to ethanol which some other sealers ain't
are they Jolly Moto?....luv the 'bare' look.............seems a shame to hide them beneath a fairing ...
'So,who's paranoid'.........The Damned's new album,released 10/11/2008 or available to d/load from...'officialdamned.com .....go on treat yourself........
headcoats wrote:Lomas Brother and they are going on me butt naked LC (aka marmite #2)
oops forgot......haven't been for a while and didnt read all the thread........
'So,who's paranoid'.........The Damned's new album,released 10/11/2008 or available to d/load from...'officialdamned.com .....go on treat yourself........
i may be the last person to know this but bead blasting rips off anodising
This Aprilia rear caliper had manky gold anodising and a quick blast and a buff up with a brass wired brush and you get this.
Last edited by headcoats on Thu Jun 19, 2014 7:57 am, edited 1 time in total.
and the slot for the speedo drive is totaly wrong on the RGV forks
](./images/smilies/eusa_wall.gif "Brick wall"){kind=small}
