Twangled your powervalve grommit in your woodruff key? ask someone how to fix it here
KFOR
Heavy Smoker
Posts: 351 Joined: Tue Oct 18, 2011 9:02 pm
Location: Somerset
Post
by KFOR » Sun Apr 01, 2012 3:31 pm
Hi all, I have noticed the left exhaust is letting out white smoke, not the usual 2 stroke lovelyness that smells so good
Any thoughts please
Cheers
Luders
Avgas Sniffer
Posts: 3926 Joined: Fri Jun 18, 2010 11:29 am
Location: Oxfordshire
Post
by Luders » Sun Apr 01, 2012 3:54 pm
is it steam? blown head gasket? Is your cooling system full?
Luders
Avgas Sniffer
Posts: 3926 Joined: Fri Jun 18, 2010 11:29 am
Location: Oxfordshire
Post
by Luders » Sun Apr 01, 2012 6:44 pm
and incase you've tried to phone/text me, I left my phone in the office on Friday.
KFOR
Heavy Smoker
Posts: 351 Joined: Tue Oct 18, 2011 9:02 pm
Location: Somerset
Post
by KFOR » Sun Apr 01, 2012 7:43 pm
Luders wrote: is it steam? blown head gasket? Is your cooling system full?
Hi Ben, The cooling system is full however i have only recently topped it up. Whilst we were at Mallory together i did notice a slight drop off in power before the CDi went down.
I will check on if its Steam tomorrow and give you a bell.
could it of blown the head gasket so soon after all it was only a running in day !? could it be the rings ?
Cheers
KFOR
Heavy Smoker
Posts: 351 Joined: Tue Oct 18, 2011 9:02 pm
Location: Somerset
Post
by KFOR » Mon Apr 02, 2012 12:49 pm
Yep, bubbles in the expansion bottle Ben coupled with white smoke = blown headgasket, knowing is 50% of the way fixed
Kev
Luders
Avgas Sniffer
Posts: 3926 Joined: Fri Jun 18, 2010 11:29 am
Location: Oxfordshire
Post
by Luders » Mon Apr 02, 2012 2:51 pm
It's a complete pisser, but a lesson learnt by both of us on this one.
When you fit the new gasket, put a healthy amount of three bond on both sides of the gasket, bolt it all down to the barrels and leave it over night to completely go off.
headcoats
Avgas Sniffer
Posts: 2120 Joined: Sat Jun 09, 2007 10:10 am
Location: Pig on the wall country
Post
by headcoats » Mon Apr 02, 2012 3:50 pm
Plus don't put the water in or even kick it over with the spark plugs in until the sealant has gone off
Can it yer old boiler
KFOR
Heavy Smoker
Posts: 351 Joined: Tue Oct 18, 2011 9:02 pm
Location: Somerset
Post
by KFOR » Wed Apr 04, 2012 8:56 pm
Thanks .... All done and engine is now running crispy sweet, all ready for castle Coombe
Now looking for some zxr400 forks etc. I'm off to pm Salty, I think he mentioned he has some.
Luders
Avgas Sniffer
Posts: 3926 Joined: Fri Jun 18, 2010 11:29 am
Location: Oxfordshire
Post
by Luders » Thu Apr 05, 2012 9:17 am
He has some wheels too you might be interested in.
fred
Oil Injector
Posts: 926 Joined: Sat Mar 22, 2008 5:42 pm
Location: retford n,nott`s working in cotswolds
Contact:
Post
by fred » Thu Apr 05, 2012 8:20 pm
when are you at castle coombe , ime just up the road at kemble
Luders
Avgas Sniffer
Posts: 3926 Joined: Fri Jun 18, 2010 11:29 am
Location: Oxfordshire
Post
by Luders » Thu Apr 05, 2012 8:39 pm
April 25th I'm at work that day
fred
Oil Injector
Posts: 926 Joined: Sat Mar 22, 2008 5:42 pm
Location: retford n,nott`s working in cotswolds
Contact:
Post
by fred » Thu Apr 05, 2012 8:47 pm
bugger got the 23rd off ,cant realy push for another day