Progress!!

2tanks · Post by **2tanks** » Thu Feb 22, 2007 9:23 pm

nice one mark, thats going to look racier , cant wait to see it all done, the suspence is killing me

Red Devil 777 · Post by **Red Devil 777** » Thu Feb 22, 2007 9:54 pm

Well don't blame me if pics and bike aren't done, other half has pissed off on Holiday this week and if I'm not careful Sunday'll end up along the lines of
'but I've not seen you for a week.....and you want to go and.....'
you all know the story

Gary, black frame, well now you mention it... no I've been thinking about it for quite a bit, I think with the black wheels and loads of other black bits will look better, I don't want to polish it cos I'm lazy and my lc has enough bits that need cleaning/polishing. I'm probably going to do the same thing with the rg125 I got for the mrs. I've had the swing arm done plus a load of other bits, plus it's just had all its panels repaired and repainted in a metallic black, makes the frame look too scruffy now.
Here's a pic for interest

Oh yeah blatent plug here, anyone who needs body panels repairing and painting contact the forums resident spares provider.... Kawaski Heavy Indus........sorry getting confused with sheer stock levels.... Mr Frog32

Lee and his brother fixed up all the panels and some were bolloxed and resprayed it all for me, all I can say is I'm very happy with the results and it was a sound price.

Garry · Post by **Garry** » Thu Feb 22, 2007 10:16 pm

agree the black frame would really set the bike off mark - just a shame
you've just about got it all together and then have to start tearing it
all down again

- part of the fun i suppose

frog32 · Post by **frog32** » Fri Feb 23, 2007 1:06 am

mark, the bike looks good

glad your happy with our work :

cant wait to see the rg finished

hope ur other half enjoys the bike

lee

Red Devil 777 · Post by **Red Devil 777** » Thu Mar 15, 2007 9:36 pm

Garry wrote:agree the black frame would really set the bike off mark - just a shame
you've just about got it all together and then have to start tearing it
all down again - part of the fun i suppose

Well, been very quiet on this front lately, but off tomorrow to pick up my freshly powdercoated 1S frame, swing arm and all the little brackets and fairing mounts. Hopefully one quick rebuild coming up, but I doubt it somehow

Garry · Post by **Garry** » Thu Mar 15, 2007 10:17 pm

don't take too long mark or you'll miss the summer

Red Devil 777 · Post by **Red Devil 777** » Thu Mar 15, 2007 10:43 pm

Using my hybrid more than anything else, so even if it's not finished still got that to play with.

Anyway all summer means to me is 7 day weeks and no riding time

Red Devil 777 · Post by **Red Devil 777** » Sat Mar 17, 2007 10:40 am

Got my frame

Decided I'd go for gloss black to match wheels etc, Got the frame, swingarm, fairing mount, all the little bits that go on the frame, footrest hangers blasted and coated for £50, cheaper than autosol and elbow grease

Ok, I'm off to my shed, you may not see me for some time

Well it's either that or restain the decking

Garry · Post by **Garry** » Sat Mar 17, 2007 1:04 pm

should look nice when its altogether

sounds a bargain

frog32 · Post by **frog32** » Sat Mar 17, 2007 4:02 pm

mark looks well nice bargain price as well

one thing hows the headstock number looking

i mean can you still read all the numbers and letters as before

lee

sprocket stu · Post by **sprocket stu** » Sat Mar 17, 2007 4:47 pm

it looks well but i prefered it polished never mind it aint my project anymore

Red Devil 777 · Post by **Red Devil 777** » Sat Mar 17, 2007 5:18 pm

frog32 wrote:
one thing hows the headstock number looking

i mean can you still read all the numbers and letters as before

Yeah no problems on that perfectly legible.

Red Devil 777 · Post by **Red Devil 777** » Sat Mar 17, 2007 5:22 pm

sprocket stu wrote:it looks well but i prefered it polished never mind it aint my project anymore

haven't got the time or enthusiasm to polish, or more to the point keep it looking good.

Might start building another one up later, with a 1 frame done black with the recessed bit in the spars polished, might be able to keep that looking ok

And I've enough very good bits to do it minus an engine, if not may just flog it as a rolling chassis.

the-elf · Post by **the-elf** » Sat Mar 17, 2007 6:28 pm

That looks really good. I think I might just get mine powder coated next winter, or pick up another frame and get that done now and then swap the parts over.

Red Devil 777 · Post by **Red Devil 777** » Sat Mar 17, 2007 6:57 pm

the-elf wrote:That looks really good. I think I might just get mine powder coated next winter, or pick up another frame and get that done now and then swap the parts over.

That's exactly what I've done, much easier as far as I'm concerned, Take large lump off and bolt onto new frame

KR-1S.co.uk Forum

Progress!!

frame

Re: frame