500BERNIE,S ENGINE

Post by **500bernie** » Sat Jan 05, 2013 9:05 pm

Hi Fred,
No problem, if Bens is unavailable I can either send mine or have a go at drawing it.
Cheers
Bernie

Luders · Post by **Luders** » Sun Jan 06, 2013 7:18 pm

Not sure where I should be posting this but here goes.

The I/D of the rubber bush will be 8mm and if you need to know any other dimensions, just ask and I'll add them to the sketch.

fred · Post by **fred** » Sun Jan 06, 2013 9:16 pm

exelent ,cheers ,sure we can work with that

Luders · Post by **Luders** » Sun Jan 06, 2013 9:29 pm

The rubber mounting parts are welded to the main bracket, so we can disregard that part of the drawing. I'll have a look for some tomorrow.

Unfortunately I don't have a CAD package, so I've had to do this sketch in Paint on my PC, so it's not the best drawing, but it should do the job.

Post by **500bernie** » Sun Jan 06, 2013 10:16 pm

Paint.......
10 out of 10 =D> =D> =D>

Post by **500bernie** » Sun Jan 06, 2013 10:26 pm

Have a look at the bearings and bushes near the bottom of the page.

http://www.gmt.gb.com/product-index.php

fred · Post by **fred** » Wed Jan 09, 2013 8:47 pm

hi ben ive just been sent a pdf of the exhaust hanger ,can i send it to you to upload as i havent got a clue,just to check it out,were getting a new amada f1 laser at work so cant cut any till next week now ....

Luders · Post by **Luders** » Thu Jan 10, 2013 1:38 pm

If anyone can find/source these, let either myself or Fred know.

Post by **500bernie** » Thu Jan 10, 2013 5:24 pm

Hi Guys,
I have emailed a supplier, I will let you know what they come back with [-o<

Luders · Post by **Luders** » Thu Jan 10, 2013 6:32 pm

Thanks Bernie, I'm really trying to find a solution too, as these brackets are like rocking horse shit.

Post by **500bernie** » Thu Jan 10, 2013 7:41 pm

I have asked if they have anything on the shelf that may fit with a modification to the bracket [-o<

Bikemike · Post by **Bikemike** » Thu Jan 10, 2013 7:41 pm

If you make a batch, I'd be interested in one please.
Ta,
Mike

martin · Post by **martin** » Sun Jan 20, 2013 2:33 pm

not long to go now Bernie,
post me the carb slide so I can put it in the ultrasonic cleaner.
as soon as the new jets[pilots and mains]come in the post, your engine will
be finished.

Post by **500bernie** » Sun Jan 20, 2013 4:19 pm

Thanks Martin =D> =D> =D>
That looks fantastic

Top-shaggy · Post by **Top-shaggy** » Sun Jan 20, 2013 4:37 pm

Wow !!!

I needed my sunglasses on to look at the screen - looks brilliant