This might be a stupid question :mrgreen:

RiRaRobert · Post by **RiRaRobert** » Sat Jan 25, 2014 8:13 pm

Hi guys,

http://www.ebay.com/itm/PWK-carburetor- ... 15&vxp=mtr

Does this fit the 28mm carbs from a KR1S ???
Sorry but I'm kind off a Noob in this

Robert

Luders · Post by **Luders** » Sat Jan 25, 2014 8:44 pm

It is, but I would establish what needle, main and pilot jet sizes are.

RiRaRobert · Post by **RiRaRobert** » Sun Jan 26, 2014 7:53 pm

Thanks Luders,

The other isue I have is that it runs on 1 cilinder the carbs are ultrasonic cleaned new sparkplugs and checked everything.
I've changed the Carbs from left to right and then the other cilinder runs fine ?

So I would say that it's the carb.

The thing is I have no idea what it could be because it looks like it is giving fuel.

Anyone an idea ??

Robert

Luders · Post by **Luders** » Sun Jan 26, 2014 8:43 pm

check the float height

headcoats · Post by **headcoats** » Mon Jan 27, 2014 6:04 pm

Main jet is the wrong type

You could maybe use some bits but I would use genuine jets only

KR-1S.co.uk Forum

This might be a stupid question :mrgreen:

This might be a stupid question :mrgreen:

Re: This might be a stupid question :mrgreen:

Re: This might be a stupid question :mrgreen:

Re: This might be a stupid question :mrgreen:

Re: This might be a stupid question :mrgreen: