The place to put pictures of your pride and joy - you can also post pics of your KR if you want!
KR1PAUL
Newbie
Posts: 23 Joined: Tue Jun 03, 2014 8:51 pm
Post
by KR1PAUL » Thu Aug 28, 2014 10:05 pm
KR-1R
Premix Junkie
Posts: 1588 Joined: Wed May 16, 2007 2:24 am
Post
by KR-1R » Mon Sep 01, 2014 8:52 pm
she's a gem
need to drop the forks at least 10mm
rare sticker?
Bertie_Mollie
Premix Junkie
Posts: 1328 Joined: Fri Apr 18, 2008 8:25 am
Location: Solihull
Post
by Bertie_Mollie » Mon Sep 01, 2014 10:00 pm
Yup, shess a good 'un
GWB KR1s C2 - Now gone
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
KR-1R
Premix Junkie
Posts: 1588 Joined: Wed May 16, 2007 2:24 am
Post
by KR-1R » Mon Sep 01, 2014 10:24 pm
sounds perhaps like an old owner
but never finished the topic?
am I old or have I only just realised
UK models (KR-1) came with swingarm bobbin bosses ?
Bertie_Mollie
Premix Junkie
Posts: 1328 Joined: Fri Apr 18, 2008 8:25 am
Location: Solihull
Post
by Bertie_Mollie » Mon Sep 01, 2014 10:35 pm
KR-1R wrote: sounds perhaps like an old owner
but never finished the topic?
Ahhhhh, that's what you think.......
KR-1R wrote: am I old or have I only just realised UK models (KR-1) came with swingarm bobbin bosses?
You are deffo getting old
GWB KR1s C2 - Now gone
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
KR-1R
Premix Junkie
Posts: 1588 Joined: Wed May 16, 2007 2:24 am
Post
by KR-1R » Mon Sep 01, 2014 10:42 pm
.
.
cant be your one ... the tyres have too much wear
KR1PAUL
Newbie
Posts: 23 Joined: Tue Jun 03, 2014 8:51 pm
Post
by KR1PAUL » Thu Sep 04, 2014 9:02 pm
deffo a good one few small cracks and light scratches but its clean and tidy and 90% original, swinging arm folk bottoms and rear pegs powder coated that's about it
its took me a good few years to get my mate to sell me it
Thrillsnotspills
Post
by Thrillsnotspills » Fri Sep 05, 2014 2:22 am
Jl pipes look the dogs danglers!!
Binetta Steve
Oil Injector
Posts: 949 Joined: Sat Nov 10, 2012 6:13 pm
Location: North Wales
Post
by Binetta Steve » Fri Sep 05, 2014 3:36 pm
Welcome to the forum, your bike looks great.
Steve
Luders
Avgas Sniffer
Posts: 3926 Joined: Fri Jun 18, 2010 11:29 am
Location: Oxfordshire
Post
by Luders » Fri Sep 05, 2014 4:09 pm
Fancy bringing it to the Japbikefest Paul? [-o<
500bernie
Avgas Sniffer
Posts: 3402 Joined: Mon Aug 02, 2010 10:22 am
Location: Teesside
Post
by 500bernie » Fri Sep 05, 2014 4:14 pm
Luders wrote: Fancy bringing it to the Japbikefest Paul? [-o<
X2
Firecracker Red and Grey C3 300
KR1PAUL
Newbie
Posts: 23 Joined: Tue Jun 03, 2014 8:51 pm
Post
by KR1PAUL » Sat Sep 06, 2014 8:54 pm
japbikefest sounds interesting
where and when is it ?
Luders
Avgas Sniffer
Posts: 3926 Joined: Fri Jun 18, 2010 11:29 am
Location: Oxfordshire
Post
by Luders » Sat Sep 06, 2014 9:01 pm
Sorry for the short notice, we are a KR-1 down for our club stand, so I would appreciate it if you could. It's at the Haynes motor museum next weekend. If you can, just PM me. There are currently 6 forum members on the stand and we have some great bikes, so will be a fun weekend.
KR1PAUL
Newbie
Posts: 23 Joined: Tue Jun 03, 2014 8:51 pm
Post
by KR1PAUL » Sun Sep 07, 2014 3:19 pm
KR-1R wrote: she's a gem
need to drop the forks at least 10mm
rare sticker?
ye guna drop them a bit
its a key ring
KR1PAUL
Newbie
Posts: 23 Joined: Tue Jun 03, 2014 8:51 pm
Post
by KR1PAUL » Sun Sep 07, 2014 3:22 pm
Luders wrote: Sorry for the short notice, we are a KR-1 down for our club stand, so I would appreciate it if you could. It's at the Haynes motor museum next weekend. If you can, just PM me. There are currently 6 forum members on the stand and we have some great bikes, so will be a fun weekend.
450 mile round trip
im up for it ye