Page 1 of 1
barrel platers recommendations please
Posted: Fri Mar 01, 2019 9:25 pm
by fred
i can supply plain ,de studded ,blasted ,de greased barrels
Re: barrel platers recommendations please
Posted: Fri Mar 01, 2019 9:45 pm
by Luders
There are only really two Fred
Re: barrel platers recommendations please
Posted: Fri Mar 01, 2019 10:30 pm
by fred
I will chat with both. See if they do a bulk discount.
Re: barrel platers recommendations please
Posted: Sat Mar 02, 2019 12:59 pm
by mellorp
I used TTW for ceramic plating. He gets a good trade discount, as he sends in batches, and then passes this saving on to customers. It's cheaper using TTW than going direct.
https://poetonaptec.co.uk/
http://www.thetuningworks.co.uk/store/p ... cts_id=708
Re: barrel platers recommendations please
Posted: Sat Mar 02, 2019 3:04 pm
by Luders
I have heard that too
Re: barrel platers recommendations please
Posted: Sat Mar 02, 2019 5:17 pm
by fred
Thanks. That info is good to know
Re: barrel platers recommendations please
Posted: Sat Mar 02, 2019 10:54 pm
by DougB
I've had a set done by Langcourts and a set Aptec coated. The finish on the Aptec barrels was definitely better. The Langcourts barrels were perfectly useable but had pits in several places, they came back with a note stating that it was normal and I didn't worry about it, but the Aptec cylinders looked perfect out the box.
Re: barrel platers recommendations please
Posted: Sun Mar 03, 2019 4:21 am
by KR-1R