Page 1 of 1

Oil and water Mixing

Posted: Thu Jul 16, 2009 1:41 pm
by alimorg
Hi All,
right, the crank seals have gone on the KR-1 so I swapped the engine over with a kr-1s unit I had lying around, now it appears that I have water contamination in the gearbox oil (milky sight window) I am going for an oil change tonight in the hope that it is just water that somehow managed to creep in whilst the motor was in storage / being cleaned if its not that where could the water be coming from?
Cheers
Al

Posted: Thu Jul 16, 2009 3:29 pm
by scooble
I had a similar problem, however, the cause was a blown head gasket, causing the cooling system to over pressurise and blow past the impellar seal. Does the coolant smell of exhaust gasses?

Posted: Thu Jul 16, 2009 3:37 pm
by alimorg
Not really but its been sitting for a while now, will have a sniff after I have ridden it home!
Cheers
AL

Posted: Thu Jul 16, 2009 10:03 pm
by JanBros
most probably is the waterpump seal.

if the headgasket is blown, airbubles should appear in your radiator.