KR-1S.co.uk Forum

Hi Guys (and Galls),

Just got my head gasket ready to fit (ground out to oversize), the burning question is:

Do I use a gasket solution to fit the head gasket (it is a brand new kawasaki one) or do I just put it on as it came from Mr K?
(if a solution is the best option, which is the best product to use?)

Your advice would be greatly appreciated as I only want to do this once.

Cheers,
Bernie

i used a thin smear on both sides of h***a bond.
the black stuff,

martin wrote:i used a thin smear on both sides of h***a bond.
the black stuff,

So do I.

Charles

Hi Martin/Charles,
Thanks for the advice. =D>
Regards,
Bernie