Water Leak

fletchndebs · Post by **fletchndebs** » Thu Mar 27, 2008 9:43 pm

Hi everyone, one of me bikes has developed a water leak from the metal water pipe from the pump across the front of the cases, it's actually leaking where the pipe goes into the cases.
Is this a major job? How is the pipe fixed into the cases? Can't find anything about this in the manual

Fletch

Red Devil 777 · Post by **Red Devil 777** » Thu Mar 27, 2008 10:41 pm

Seem to remember that it's held in place by the water pump casing bit and the two bits that go into the engine are just 'o' ringed up. Sounds like you've got a dodgy 'o' ring.

nate · Post by **nate** » Fri Mar 28, 2008 1:04 am

Aye,

the water pipe just plugs into two rubber o rings... Should just be able to pull it out I think.... But be carefull, you dont want the crap going back into the crank case... if you see what I mean...

I have my engine in bits, so can post a pic if its helpful...

Cliff · Post by **Cliff** » Fri Mar 28, 2008 4:17 pm

I have one in my garage, so here is a picture. If i remember you have to remove a securing bolt first. Hopefully you will only need to replace the "o" rings).
This one i promised to NOS EXUP a long time ago

. ( sorry it's on it's way soon).

mr_bungholeo · Post by **mr_bungholeo** » Fri Mar 28, 2008 7:03 pm

when mine failed i tried to remove it without removing the outer engine casing and its impossible...u have to remove the cover first ..and put some silicone on the o rings as they can fail from new......best of luck...

daniel · Post by **daniel** » Fri Mar 28, 2008 7:49 pm

yo dude ive got about 10000 o rings for the water pump rail if u get stuck il send u a complete set for 5 quid including postage danny 07809 374414 =D>

fletchndebs · Post by **fletchndebs** » Sat Mar 29, 2008 10:41 pm

Thanks for the information guys but i haven't got to deal with this problem now as i've sold said bike and bought something different